Jump to content
SAU Community

Recommended Posts

Only if you cut the bracing under the bonnet, it's alloy too remember.

You should design one that goes to the firwall and bolts up there before meeting back at the other tower. Sort of like the accord ones

  • 2 weeks later...

Hey guys,

Bit of an issue with my M35. I have recently installed a shift kit and plenum spacer. After instaliing the shift kit... No problems. Car is working as advertised...although a very loud thud when kicking down gears around 100kmh's.

However, after instaling the plenum spacer, the car's idle is very rough. It jumps and drops about 100rpm and the car shakes a fair bit. Has anyone else had this problem? Yesterday it managed to throw a ECL however I could not get the code from it. Trying to count the flashes just about caused an epileptic shock... So i reset it and the light has gone.

Any ideas?

Sounds like an air leak to me. Certainly not something you should be experiencing after installing the phenolic spacer.

I did experience a bit of "hunting" (+/- 50rpm) when idling, but that was when I had the alloy spacer in there. None of this with the phenolic spacer.

I have the same issue. I'm thinking it must be a vac line somewhere.

Yeah, I thought the same and i did have a cracked vac line running from the intake to the solenoid that i broke. However replaced that vac line and still have the same problem. I am starting to think i didnt do a bolt or something to the correct torque (19nm?) so I will go back and tighten everything up and see if i can further trouble shoot this problem.

It doesn't need to be too tight, as a warning. From some instructions I've got for a VQ35de, the torque that the lower collector should be torqued down with is equililant to what you would get with one of those screwdriver socket thingos. Just hand held, not even a ratchet or anything. Don't strip the threads.

I'd keep looking for a loose line, one car I know used to blow them off when using aerostart. However, it could also be a folded over gasket or something really simple like that.

Another trick with intake leaks is to spray some brake cleaner or something round the joints in the manifold to see if that effects the idle- if it does, you have a leak.

  • 2 weeks later...

Q: Everynow and then I get this fully feel in the brake peddle, it's like it fights me when I put my foot down and have to put quite hard in order for it to stop quickly... Any thoughts people. I thought it may be a pad/rotor issue but as I have replaced both I'm back to square one.

Q: Everynow and then I get this fully feel in the brake peddle, it's like it fights me when I put my foot down and have to put quite hard in order for it to stop quickly... Any thoughts people. I thought it may be a pad/rotor issue but as I have replaced both I'm back to square one.

You might have siezed/bent caliper pins; or a sicking piston in a caliper.

Caliper pins can cause all sorts of odd brake issues.

Edited by Daleo

You might have siezed/bent caliper pins; or a sicking piston in a caliper.

Caliper pins can cause all sorts of odd brake issues.

How would one check these parts?

Also what is funny is that it only seems to do it once when first driving it, after that it seems ok...

How would one check these parts?

Also what is funny is that it only seems to do it once when first driving it, after that it seems ok...

Sounds like something is heating up and expanding to seal the leak.

How would one check these parts?

Also what is funny is that it only seems to do it once when first driving it, after that it seems ok...

Jack up/ jack stand- remove wheel, remove brake pads, inspect piston, make sure it goes in and out and shit. Look at the pins, make sure they are straight and I think they should have a little grease on em.

Could be a suspect master cylinder seal as well.

Jack up/ jack stand- remove wheel, remove brake pads, inspect piston, make sure it goes in and out and shit. Look at the pins, make sure they are straight and I think they should have a little grease on em.

Could be a suspect master cylinder seal as well.

This may sounds funny but how would one get the piston to come out? Just put my foot on the brake with the pads out and caliper off?

Also one thing I did notice was that the brake fluid resivour was full, way full, up to the neck. Would this be an issue?

yeah, you don't really want to piston to come out the full way. I haven't done the rear pads yet so haven't looked at them, but sometimes the rear pistons are slotted and have to be turned to retract back into the housing, sometimes they just slide so you can use a G Clamp.

So take them off, and inspect the slide pins, pads and piston. Then make sure you empty out some brake fluid from the reservoir, just down to the minimum line, before you try to get the piston back in. If it has groves, it will spin- someone should jump in and confirm if it does. So turn it in a little way- this will force fluid back into the reservoir. Check the level, and add new fluid if needed. re-assemble, start car and let it idle, then pump up the brake pedal and make sure the piston comes back out and clamps, and you have effective braking- at least then you know that end is good.

Its a bit funny that the fluid is right up the the neck. Usually fluid drops as the pads are being worn, and the pistons push further out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...