Jump to content
SAU Community

Recommended Posts

Hey ppls,

As promised last night at the meeting, here is some information about Final Inspection and their services.

Final Inspection

95-101 Brunswick Road, Brunswick, VICTORIA 3056

(03) 9387 8008

[email protected]

Forums are at www.finalinspection.com.au/forums

Go there, register and have a look at some simply amazing detailing work.

And by the grace of Damien, the proprietor of Final Inspection, and arguably the BEST Automotive detailer in the country, here is the Final Inspection guide to SCRATCH FREE car washing.

The Final Inspection Recommended Washing Process

This informative blog is to educate on proper washing technique. It was developed as a solution for fussy owners to help dramatically reduce swirls (micro scratches) and spider-webbing caused by harsh and incorrect washing techniques, products, methods etc.

The instructions incorporate two new and very different procedures designed by me for Black car owners but should be adopted by all enthusiasts:

1. The Pre-rinse technique. A proven valuable process (specially designed for Black car owners).

2. The single bucket method (allowing easy, but safe rinsing).

The instructions are broken into 5 easy steps showing how to wash the car including wheels, wheel arches and glass - safely and easily.

Tools & Products needed.

1. Water, either a trigger hose adaptor or high-pressure unit is necessary (water restrictive technique is described in another blog available from the Final Inspection Website).

2. One clean bucket filled with Hot Water (~60 deg Celsius).

3. Two Microfibre Wash mitts, one for Wheels, Wheel Arches & Tyres and one for the Body.

4. A Microfibre Drying Towel

5. Final Inspection Auto Detailing Body Shampoo

6. Final Inspection Auto Detailing Power Wheel Cleaner.

7. Final Inspection Auto Detailing Tyre Dressing.

8. Final Inspection General Purpose Cleaner.

Step 1 – Cleaning Wheels, Tyres & Wheel Arches

It is a good idea to regularly clean your Wheel Arches to stop build up of dirt on these plastics (or sound deadening fabric e.g. Alfa Romeo, Audi etc.)

Spray gentle, non-caustic General Purpose Cleaner or degreaser onto these plastics or fabric as well as your tyres to remove and stop build up of old Tyre Dressing. Agitate if necessary.

Spray gentle, non-caustic Wheel Cleaner onto wheels and agitate if necessary.

Rinse Wheel arches first, then Tyres and Wheels (High Pressure Recommended).

Step 2 – Initial Rinse

High Pressure (recommended) your vehicle from top to bottom removing all co****, loose debris.

Step 3 – Pre-Rinse Technique

Spray a small amount of Body Shampoo at the top of each panel. There is no need to use too much product. If you have a foam gun, this will be useful to apply body shampoo here.

Rinse your Body Shampoo off the vehicle starting from the top down.

This is the Pre-Rinse method and ensures more of the dirt on the vehicles exterior surfaces is removed.

The Body Shampoo will pick up and hold the dirt ‘in suspension’ and upon rinsing the car, the soap ‘holding’ the dirty material will be rinsed off the surfaces.

The surfaces are not clean but will appear cleaner as there is less dirt on the surfaces. The washing now removes what is left on the vehicle with minimal dirt being pushed into the painted surfaces greatly reducing the chance of causing swirls (micro scratches).

Swirls are caused when abrasives are moved across the surface, reducing the amount of these abrasives on the surface prior to washing reduces the degree of damage.

Every time you wash your car, you will be causing damage to your paint. It is impossible not to cause micro scratches and on dark colours they appear to be worse. It is even worse if you do not wash at all as the dirt will be harder to remove when you have to and cause greater damage. The trick is to wash the vehicle as safely as possible and the Pre-Rinse technique helps dramatically.

Step 4 – Body Washing

Wash the car with a Microfibre Mitt and Body Shampoo.

Dip the Mitt into the bucket of water to moisten it. Spray the Mitt with Body Shampoo and wash a panel from top to bottom without overlapping the strokes. Overlapping means over washing, you don’t have to wipe the same area of the surface more than once and doing so is unnecessary.

After washing the panel, dip the Mitt into the Bucket of Hot Water and with your fingers, push the dirt from the Mitt into the water in effect, cleaning the mitt of all the dirt it has picked up from the surface.

The dirt will fall to the bottom of the bucket and the top section of the bucket will remain clean.

The Micro fibres in the Mitt will ‘open’ in hot water and release all the dirt in them, when it is removed from the bucket and squeezed dry it is ready for use again.

Microfibre is also much less abrasive than Lambs Wool, sponge or cotton and thus is gentler to use.

Continue washing all panels & Glass with this method.

Step 5 – Final Rinse & Drying

Rinse the car (High Pressure Recommended) and dry with a Microfibre Drying Towel.

After the 1st Final Rinse (and only if local coucils permit) use a watering can or hose without attachment to 'sheet' water from the top of each panel down to help disperse water from the panel. This will leave less water on the surfaces and help reduce Drying time and the amount of overlapping passes with your Drying Towel, again, reducing contact with the surface and reducing Swirls (Micro Scratches).

Polish & Wax the car if/as you normally would. For information on correct Polishing & Waxing see the Final Inspection Website.

I hope you find this interesting.

BASS OUT

Check out the forums.

Edited by Bass Junky
  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

The Micro fibres in the Mitt will ‘open’ in hot water and release all the dirt in them, when it is removed from the bucket and squeezed dry it is ready for use again.

So the microfibre cloth shouldnt be wet when washing the car?

I always dunked it into the bucked and took it out blobbing as much soapy water onto the panel before moving arm to wash it

Cheers for the info

Hi Rekin,

MicroFibre mitt SHOULD be wet when washing the car.

Should also be rinsed after washing the panel, some people do it in a separate bucket.

I just take my car to Damian and let him do it :nyaanyaa:

going there next week and buying a heap of stuff lol

getting RO and the different types of foam pads and the right polish/wax for my car and also the micro fiber stuff for washing and drying.

will give it a go and see how it turns out. if not ill let Damien do his magic lol

Just got back from Final Inspection. They just washed the 6 and I am truely impressed. I was paying $27.50 for a simple wash on the place in Punt Rd and they did a fair job but for $25 at Final Inspection, Damien's crew did a great job on the car.

Will most likely will be taking the 6 there again just before summer for a full detail.

Highly recommended!! Take your car there and you won't be disappointed.

F.I. is truly a level above anyone else (if not a few levels) yet his prices are just as competitive as those doing nastier washing/detailing jobs. So it's an absolute no brainer to use his services.

Oh and it's D-A-M-I-A-N

:P

Got waffle? :P

EDIT: i'll add some tips for those who have bought the waffle weave...

- Fold it half length ways, then again. This helps apply even pressure to the panel, and reduces the chances of pressure spots to induce swirling when drying.

- Drying your windows first as the WWDT works better when slightly damp. So give the windows a quick going over, and then use the above tip on the rest of the car.

- Like washing, avoid overlapping motions. Paint isn't like fabric, it's either wet or dry. So 1 or 2 passes of the WWDT leaves the paint 90-95% dry, no need to keep drying a panel that will dry on it's own a few seconds after the last pass.

- With a long, thickish WWDT, you could probably dry half a bonnet/roof in 1-2 passes, then repeat on the other side. Again, minimal passes is going to reduce swirling, and also travelling in one direction as opposed to the usual Karate Kid 'wax on, wax off' motion, you will minimise marks

I was impressed with how clean your car is (considering it was sitting in the weather! ) Jack when I saw it at Bens last week..... All my high end customer cars I normally use a combo of Zaino / Poorboys & Wolfgang products. What have you been using on yours?

Edited by RNGTR

Cheers Rod!!!!

It was in excellent condition when I bought it, so I've tried to keep it that way, although now there are a few battle scars from taking it to the track..:domokun:

I will paint the front end at the end of the year to freshen it up again...

As far as products...eerrr.... turtle wax?? I think???

Haven't had it professionally deatiled before, so will look into it after the last track day in Nov...

Didn't know you did detailing for a living??? Do you work in town or out in the bush???

(Sorry for being off-topic!! *hides from Ash*)

Hey guys,

I think it would be a little nasty not to post in here so here I am saying hi and thanks for all your kind words and support for those of you that have been down to the boutique for either a wash, detail or products.

If you have any detailing/washing q's and you think I can be of any help, let me knwo and I'll try to respond with an accurate answer as quickly as possible.

Also, we've introduced a 'Pete Discount' :thumbsup:

Basically you guys (SAU) get 5% off all FI detailing now because of that guy.

Cheers,

d.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
×
×
  • Create New...