Jump to content
SAU Community

Recommended Posts

Got quoted $1500 for Lenso Tenso DC5 Charcoal Grey's w/cheap tyres. http://www.tempetyres.com.au/products.asp?...o+Racing+Sports

Is that too cheap, I mean are they going to be 10 times heavier than the stock rims? Are they going to fall apart or something? Most other rims tend to be at the least $2000

Link to comment
https://www.sau.com.au/forums/topic/185843-is-1500-too-cheap-for-some-rims/
Share on other sites

Tempetyres are an honest shop. they wouldn't dare do anything dodgy :P

What size did you ask?

Ever wonder why they are called temporary tyres?

nah im just slinging shit :D go check em out yourself... I'm definately no rim expert, but if its a one piece, its gunna be hard to break...

Tempetyres are an honest shop. they wouldn't dare do anything dodgy :P

What size did you ask?

Ever wonder why they are called temporary tyres?

nah im just slinging shit :D go check em out yourself... I'm definately no rim expert, but if its a one piece, its gunna be hard to break...

18x8's Hope there not too heavy.

they will be pretty heavy. they are a cheap-ish wheel. not terrible, but not very good either. they are cast so will not be too light.

the one thing I don't like so much about lenso is many of their popular wheels are copies of good japanese designs.

the one thing I don't like so much about lenso is many of their popular wheels are copies of good japanese designs.

And the question is which would you rather have - the wannabe or the real thing.

Those Lensos are obvious copies of the Work Meister S2R/Emotion CR-Kai design

Also, these cheap wheels tend to have cheap quality.

I mean just looking at the packaging and documentation that came with my Rays and Work wheels you already know they are made to a high quality.

And the question is which would you rather have - the wannabe or the real thing.

Those Lensos are obvious copies of the Work Meister S2R/Emotion CR-Kai design

Also, these cheap wheels tend to have cheap quality.

I mean just looking at the packaging and documentation that came with my Rays and Work wheels you already know they are made to a high quality.

well personally I don't currently and never have owned any imitation or cheap chinese wheels because I can't stand them. I currently have enkei NT03s, weds sport TC-05s and BBS LMs all genuine and all lovely. but of course they cost $$$.

They usually come with shit offsets too don't they.

Maybe?

You wouldn't know because these cheap rims don't even have stickers on them displaying the offset or width!

With my Rays rims I can even tell what month and year they were made.

And the question is which would you rather have - the wannabe or the real thing.

Those Lensos are obvious copies of the Work Meister S2R/Emotion CR-Kai design

Also, these cheap wheels tend to have cheap quality.

I mean just looking at the packaging and documentation that came with my Rays and Work wheels you already know they are made to a high quality.

Didn't know they were copies. I found the real ones on JDM concept for $1900, no tyres. Thanks dude.

realistically if ur after rims that just look good buy whatever u think looks good, unsprung weight will play a decent role in how the performs, but when it comes down to it if ur not someone that thrashes ur car u will barely notice it. saying that for $1500 some decent 2nd hand genuine rims can be had, but they wont usually be in the condition of the new wheel for obvious reasons.

ur usually better off buying Japanese as they are one of the few countries that has regulations and standards for wheels, Australia doesnt which means the cheapest and nastiest wheels can be sold. not to say these are, but u never know. these copies usually use a very cheap casting method which means to build strength in their wheels they need to use a lot more metal which = weight.

Some advice.. Just buy some cheap ass jap rims you like...

Ive got Starcorp Impuls - Sexi as hell and real deep dish but in the first week of driving with them I had incredible back pain from driving to full sick with such heavy wheels..

They weight about 20 kg each a jap spec rim is about 7-10kg each .. You understand the difference if your on track but if your on the city roads stuff it just buy what you like.

Dont buy bling bling chrome!!

Thanks Bye

Hey buddy, These rims are actually pretty light compared to similar rims in that category.

I was recently booked for running adaptors plus spacers due to widebody kit, so had to find some rims quick and I came up with these in a 19x10 19 offset for my 34, i can tell you i work in the wheel and tyre industry, the wheels are light when compared to other cast wheels, and from personal experience i have not had any trouble with them.

I can post up some new pics if you wanna see how they look.

If your still interested in these but dont want to go through Tempe, give me a pm :whistling:

Al

If they come with a 12 month warranty on the finish and a lifetime structural guarantee which most new rims have then i say go for it.

And if you ever do accidentally nudge a gutter you won't commit suicide ! :D

Only thing I will say is be extremely careful when buying rims from tempe when it comes to getting the right offset for your car....either make sure you know what offset you need or you actually take your car down and test fit the rim.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...