Jump to content
SAU Community

Recommended Posts

Didnt know where else to Post this.

But It has come time for me to get mi Mits on some new tyres. Ive Been Looking around a bit, and have Noticed that Bugger all tyre shops actually have 20" tyres. BoB Jane were the only place out of about 5 that I Visted, that actually stock 20" tyres, only 1 brand tho, WANLI and $320 a tyre stings just a little. So I was hoping some 1 could steer me in the direction of some Magical place that have various brands of 20" tyres and good prices.

peace!

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/
Share on other sites

Your worried about $320 a tyre for 20's? onoes...

Dude a decent 20" tyre that isnt a death trap is going to be at the least, $400-450 a corner, and a lot more for a decent tyre :wave:

What distributors have you tried so far?

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3363450
Share on other sites

the Tyre Expets on Sydney rd Falkner will definetly have em. they also stock 2nd had ones too.

i picked up perelli pzeros. 275 on the rear. 19s. second hand but got great tread( still fine after 6 months) for like 200 or something.( think they were around 500 a tyre new).

http://www.thetyreexperts.com.au/

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3363459
Share on other sites

Your worried about $320 a tyre for 20's? onoes...

Dude a decent 20" tyre that isnt a death trap is going to be at the least, $400-450 a corner, and a lot more for a decent tyre :wave:

What distributors have you tried so far?

Ive tried a few, Mainly well known commercial places etc.

the Tyre Expets on Sydney rd Falkner will definetly have em. they also stock 2nd had ones too.

i picked up perelli pzeros. 275 on the rear. 19s. second hand but got great tread( still fine after 6 months) for like 200 or something.( think they were around 500 a tyre new).

http://www.thetyreexperts.com.au/

thanks for that one mate ill check em out!

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3363484
Share on other sites

if you want tyres pm me the size and ill hook you up with a quote i run the workshop at a tyre place in balwyn.hope that i can help.

can you do any deals on 315/35/17's? Sumitomos preferably.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3365025
Share on other sites

i would spend the extra $$ and get a decent tyre.. Ive had a set of cheaper 20" tyres and they squell when cornering and have minimal grip and were outright dangerous in the wet.

I now have decent Nankang NS 2 performance tyres which costed me about $500 each, but their well worth it as they wear slower and have a heap of grip.

You can't put a price on your life.. trust me go the extra mile and buy something decent..you pay for what you get.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3365332
Share on other sites

wtf?

lol thats massive for wat car?

widebody R32... rear wheel is Work VS-XX 17"x11" -6 offset. 315/35/17 is a common sized tyre in the US as its the same size corvettes and vipers use. They even make Nitto drags in that size :thumbsup:

Kakimoto wide body R33

I wish... kakimoto takes 355/something/17's. lol craig almost tore his hair out looking for new tyres... only people that make em are bridgestone and pirelli... special order.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3365367
Share on other sites

I just bought 20inch rims for my R32 GTR i live in Sydney and got them from Tempe tyres, they were custom drilled on site and are perfect offset for the car.

They sold them with Nankang but i upgraded to a Toyo brand. It fills the guards perfectly and still have room to lower the car 2 inches from stock ride height when i get my coil overs soon. They cost usually $3600 but they had a deal going and i managed to bargain them to $2800 fitted with the up rated tyres to so i was very happy.

I cant believe it but my ride quality is still great even with the mrs in the car i was very surprised not that bumpy could be because i had a good set of tyreson there quality counts.

When i figure out how to put pics on this site i will put it in you guys will be surprised how good 20s look, i will keep the Original forged 16 inch GTR rims for track use and drifting events but the 20s are for show.

Cheers,

Dave.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3365878
Share on other sites

Hi there Paul R33 i am not sure what it will cost for 20inch rubber yet i got them as i great package deal.But i will say this my GTR in its current mild form ran a 12.4 1/4mile with ease i had no wheel spin or broke traction, i have pushed this car hard on the street always and never had had probs unless i wanted them if you know what i mean and all of this was done with the cheapest set of standard Bob Jane tyres. Yep no bull so if below average tyres will rack up a low 12sec 1/4 and handle decently on the road im sure a set of low profile Toyos will easy out handle and grip the cheapest set of Bob Janes.

Cheers,

Dave.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3366691
Share on other sites

have u had the wanli's before...??? iam not really a fan of them as the tend to understeer in the wet, wouldnt suggest them for a performance car.

Yea ive Got WANLI's atm, and they are dangerous in the wet. traction is a minimal. Drifting around every corner in the wet is bit rediculous at times. but id have to admit on Hot days they are Alright.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3366723
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...