Jump to content
SAU Community

Recommended Posts

Ive been doing quite a few home services over the years for people looking for a cheaper yet professional alternative then taking it to a workshop. I'm a mechanic and gas fitter by day, have several Skylines of my own and like to help out others with them. Have recently done several Stagea 100K services also. I'm not operating a business nor am i interested in starting one lol, However i am offering to help out people who need some work done during the weekends. It will be cheaper then a workshop but i dont work for free lol.

PM me if your interested.

Link to comment
https://www.sau.com.au/forums/topic/186453-car-servicing-100k-services-etc-etc/
Share on other sites

Simon has been doing all the work on my car for the past 6 months. before that it was Boostworx..

Have had same great results with both mechanics..

Kinda tells you the quality of simons work hey :domokun:

+repz

Christian

Simon, what would I be looking at for fitting a clutch to R33 GTS25t including machining flywheel?

PM me to let me know

Cheers :whistling:

Lee

PS was that you in the cream 32 on port rush rd as posted in the spotted thread?

sure was mate, thats my gf's car.

Clutches are one of the few things i wont do at my place, well on 33's anyway, A hoist is needed pref. 32 boxes are no worries lol.

I can however point you in the right direction for well priced yet good clutch jobs.

Cheers

Simon

sure was mate, thats my gf's car.

Clutches are one of the few things i wont do at my place, well on 33's anyway, A hoist is needed pref. 32 boxes are no worries lol.

I can however point you in the right direction for well priced yet good clutch jobs.

Cheers

Simon

Speaking from personal experience there Simon haha!! :D

yes and no, ive done the exact cooler and fit to my neighbours S2 r33 and i found the cooling pro kit lacked a few brackets and clamps, which meant stuffing around a bit. But otherwise its around a 3 hour or so job. I like to take my time when it comes to trimming the bar since this its the most visual area.

chuck it in your sig mate, ive had very good results with me offering my services

yeah Dan does the right nut :D between the to you got a couple of half nuts

BTW who do you recommend for clutch jobs

Edited by Madaz

One of my mates also runs his own business from his house.

His name is Mark and his business is Fuel Automotive, he is a diesel Mechanic by trade and does all the work on my car.

He does all mechanical work no matter how big or small and is much cheaper than a workshop.

If you would like to use his services you can PM me and i will give you his number.

Please remember that he only does this stuff in his spare time as he has a full time job.

^Shaun, sounds like the same guy who works on Martin (HOSTILE) and PureSX's cars. if you can PM me a number for him, I'd be interested to get a quote from him.

Cheers

Hotwire you are correct as we are all close friends

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...