Jump to content
SAU Community

Recommended Posts

hahah that's so true I'm still trying to find the glamour. A real high point for me was doing an oil change at the burnie road side service a couple of years back. hot engine, hot oil, pouring rain, no shelter. glamourous

but re dirt roads....what is with you big girls? service crews spend half of targa on dirt roads in crappy old vans tgrying to get around to road closures. you guys are soft. rocks fall off as soon as you launch at the next stage as long as you give it a serious launch :P

  • Replies 369
  • Created
  • Last Reply

Top Posters In This Topic

I know way more dirt Roads in Tasmania than I have uses for now!

:P

No matter what happened with the cars (gearbox, secondary exhaust flange, half shaft, 2 rear rotors and 2 engine mounts) I still had a great time because of the people involved! I'll be back next year, hopefully in the crazy seat somewhere!

you notice the chopper didn't follow us like it followed the leaders, was pretty cool to drive under it at that altitude.

If you turn Queenstown to high quality, you can see kids running accross the road at around 3:20

Loving that chopper on Queenstown!

Did anyone see the one parked on the side of the road at Reece Dam (???)- I never normally look up enough to see anything during a TS but it was hard to miss! It was big for me to notice- Pete had to tell me about the fact we nearly went through a fence (apparently) @ Beaconsfield!

Sorry- it was a chopper parked on the side of the road at Reece (if my memory of teh stages is still working).

It was the LHS of the road, about half way through I think?

I was like WTF- that's a bloody funny looking car :down:

Way too many offs on that stage, and it was hard to tell what some of those cars started off as- I saw what I think was a very messed up diesel mazda, the pug and the porker.

We were literally the last car in before the sweep so saw all of the carnage.

Yes I saw the HUUUUGE chooper too.... I was thinking, "funny place to park a mega-dollar chopper!"

Oh, and here's our Liena stage - VERY POOR SOUND THOUGH! Grrrrrr

Edited by Marlin

Congrats to all who competed

To team shake and bake, loved your stickers, followed your guys all week

Targa is such a tough event to cover photographically, but a lot of fun

Savman on your video from Queenstown, you can see me on the video in a yellow vest at the 1:07 mark. That was such a good stage to photograph

Il hopefully get some photos up over the weekend

I shot way too much, about 8000 frames which works out to be 30+GB of files

How do you blokes afford the fee to upload car footage onto the net?

Yeah Ben, that big yellow stain is a giveaway.

The Gravel - much better than running on two coat seal flat out... Sidling for eg. Longley a few years ago too. Bit of gravel - our tyres didnt pick up jack. But Duncan did warn me!! Even though we went M.

TT984

show's up like dogs balls on a white car dosn't it. There were a few other cars with yellow up their arse too, i'm sure ours will be fixed when the rest of the car is fixed.

I didn't think you had to pay to upload footage, unless it was for commersial perposes?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...