Jump to content
SAU Community

Recommended Posts

the spec's for the car so far rare, (it will be purely timeattack & sprints, with a sports sedan lod book)

hope to have it done by may! (i hope)

(nearly all this stuff i already have waiting for it)

engine 3 ltr.....

Why have you changed from the 2.6 full counter to a 3.0 litre, given the success of the 32?

  • Replies 705
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Why have you changed from the 2.6 full counter to a 3.0 litre, given the success of the 32?

hi mate

yeah good question, we are hoping for more torque across the range with similar turbos to what we currently use.

rpm limit will be about the same at 8000 or 8200 rpm,and we will have an extra gear too with the six speed sequential.

also this car is being built for a very different type of racing as it will be mainly on circuits and cill climbs, and the 32 was built as an all rounder with alot of ability on motorkhanas and things with a hydraulic handbrake setup and it could just bolt of corners and witches hats. and great gearing especially with a higher rpm limit.

i hope we have good results but wont really know for a few months.

chassis is almost stripped and stand is being made

post-17546-1202468653_thumb.jpg

cheers russ

So Russ are you going to reveal plans for the body work? hehe. or can I?!? It's certainly going to be a one off in Aus that's for sure.

absolutely you can if you like!

it will be great,cant wait to drive it! and help me forgive myself for doing this to such a lovely car and my wife will get off my case too!

Hey, I only just found this thread. Do you remember me? I am the guy with the GTR covered in Falken stickers. I raced at Maryborough & gatton. Are you comming to gatton this year?

I'm not racing this year. The car hasnt changed at all, hardly gets used actually coz I'm starting to build a house etc. I am setting up (suspension & alignment) a 32 GTR for gatton. It is a pretty serious one from what I can gather too, Its got a sequential box & stroker too I think.

I will be there to see how it goes, so I'l come n say gday.

  • 2 weeks later...

Oran Park short I believe.

I told mark it was 5th June so what he thinks is last minute will actually be an extra month to prepare muahahaha. We've still got a lot to do, cage isn't even in yet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...