Jump to content
SAU Community

Recommended Posts

the spec's for the car so far rare, (it will be purely timeattack & sprints, with a sports sedan lod book)

hope to have it done by may! (i hope)

(nearly all this stuff i already have waiting for it)

engine 3 ltr.....

Why have you changed from the 2.6 full counter to a 3.0 litre, given the success of the 32?

  • Replies 705
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Why have you changed from the 2.6 full counter to a 3.0 litre, given the success of the 32?

hi mate

yeah good question, we are hoping for more torque across the range with similar turbos to what we currently use.

rpm limit will be about the same at 8000 or 8200 rpm,and we will have an extra gear too with the six speed sequential.

also this car is being built for a very different type of racing as it will be mainly on circuits and cill climbs, and the 32 was built as an all rounder with alot of ability on motorkhanas and things with a hydraulic handbrake setup and it could just bolt of corners and witches hats. and great gearing especially with a higher rpm limit.

i hope we have good results but wont really know for a few months.

chassis is almost stripped and stand is being made

post-17546-1202468653_thumb.jpg

cheers russ

So Russ are you going to reveal plans for the body work? hehe. or can I?!? It's certainly going to be a one off in Aus that's for sure.

absolutely you can if you like!

it will be great,cant wait to drive it! and help me forgive myself for doing this to such a lovely car and my wife will get off my case too!

Hey, I only just found this thread. Do you remember me? I am the guy with the GTR covered in Falken stickers. I raced at Maryborough & gatton. Are you comming to gatton this year?

I'm not racing this year. The car hasnt changed at all, hardly gets used actually coz I'm starting to build a house etc. I am setting up (suspension & alignment) a 32 GTR for gatton. It is a pretty serious one from what I can gather too, Its got a sequential box & stroker too I think.

I will be there to see how it goes, so I'l come n say gday.

  • 2 weeks later...

Oran Park short I believe.

I told mark it was 5th June so what he thinks is last minute will actually be an extra month to prepare muahahaha. We've still got a lot to do, cage isn't even in yet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...