Jump to content
SAU Community

Recommended Posts

hey bud, nope not as yet but thats not were there hitting. Front wheels are scrapping badly on the plastic shrouding so might have to take it all out. Car is not overly low either as you wouldve seen last weekend, can still fit my hand between the tyre/gaurd etc.

Ryan

hey bud, nope not as yet but thats not were there hitting. Front wheels are scrapping badly on the plastic shrouding so might have to take it all out. Car is not overly low either as you wouldve seen last weekend, can still fit my hand between the tyre/gaurd etc.

Ryan

Yeh mate, that inner guard needs to come out and be chucked....lol Lip/roll the guards and drop her a little and bobs your uncle! But going on your previous 32, you know what your doing anyways!! :)

Yeh Boostworx are really good on prices, they charge what people should charge, none of this "yeh mate thats gonna be $1,374,724.00 for that tune" "oh and i boosted it to 2,583psi, But geez look at your power figures"!!

My last tune was through Steve at manta racing and it cost $350. He takes the car to wilall racing where Peter Hall did the tune and my 32GTR put out 292rwkws at only 1.1bar of boost. Martin tuned the car at Tilbrooks before that and the car was doing 299rwkws. Peter however said it was to close to detonation. (same boost)

This is with no cams, standard injectors and no boost controller.

I run 34GTR N1 turbos and they are better than the stock turbos by far. Spool up quicker and more power.(259rwkws)

from stock turbos and nothing else changed.

I didnt think that you could run that much boost on N1 turbos (40psi) . I hit full boost by 4,000rpm .

? where in your rev range would you be able to spool up 40psi ?

haha..it was just an example mate, as in the turbo's can take whateva boost levels you can throw at them. I dont no where in the rev range 40psi would come on but I no people running high 30psi on built engines and they seem to like it.

Ryan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...