Jump to content
SAU Community

Recommended Posts

  • Replies 285
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 weeks later...
hey Steve (R34GTFOUR), has yours turned up yet? how well does it fit?

sorry for the late reply, since i bought it i havent checked the thread :whistling:

The radiator i got wasnt for my r34, it was for my r33 gtst and i've got nothing but praise for it. Looks great, top welds and everything is in its correct spots (ie mounting postions, the shroud locations etc)

Delivery was quick aswell, im a happy chappy :D

Has anyone noticed that the bottom mounts on the radiators are too close together and dont sit in the female mount correctly? This is for an R32 gtst. Im just wondering if i should take mine back to Unique Autosports, as i picked it up from there.

Shaun.

  • 3 months later...
Has anyone noticed that the bottom mounts on the radiators are too close together and dont sit in the female mount correctly? This is for an R32 gtst. Im just wondering if i should take mine back to Unique Autosports, as i picked it up from there.

Shaun.

Yes I have noticed that, it also sits about an inch lower in my car than the same type of radiator in a mates car.. can't figure it out :) had to turn the little retainer brackets upside down.

I'm actually about to take it out in favour of a serviced gtr radiator or something completely custom.. rising temps on the highway doesn't make me feel comfortable and before anyone asks, the rest of the cooling system is mint.

Edited by bubba
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...