Jump to content
SAU Community

Recommended Posts

i have a couple friends who use taio's turbos. tr43, tr44, and the new tr29. these were on ca and sr motors.

the only disadvantage is they're not bolt on, and you'll need to get a manifold and/or dump.

my mates are happy with them and havn't had any problems. taio is a cool guy who is also willing to help out if needed.

Nice.. keep the information coming. Id like some info of how they have gone on an RB25 though..

If i get one for my RB25 with the Internal gate that it comes with, what do i need to do to fit it..?

I was told i need a V-Clamp separate...

here's a TR43 on 14psi making 250kws wheels on stock rb25 engine.

r33250kws.JPG

And here's our sponsored R32 drifting with 190kws on 10PSI on TR43 at calder

And here's Our Sponsored S13 CA18det drifting at Winton with 250kws on 16PSI running TR43HF turbo.

Enjoy the show :) And please don't hesitate to pm/contact me if any information is required. Thank you all guys.

here's a TR43 on 14psi making 250kws wheels on stock rb25 engine.

r33250kws.JPG

And here's our sponsored R32 drifting with 190kws on 10PSI on TR43 at calder

And here's Our Sponsored S13 CA18det drifting at Winton with 250kws on 16PSI running TR43HF turbo.

Enjoy the show :P And please don't hesitate to pm/contact me if any information is required. Thank you all guys.

hmm interesting.. thinking bout giving garret a miss this time round. so ill need a different manifold. u got a kit for SR20?

For RB20 we can supply you the full kit of:

Tr43 440HP turbo (250kws wheels)

high mount T3 manifold

38mm external wastegate

braided oil feeds

dump pipe bend and fittings

total: $1550

Add $50 more we can high flow this turbo to 500HP (300kws wheels)

when can we expect full boost for the non high flow and high flow turbos?

is it very responsive with the setup mentioned above for both highflow and non highflow?

cheers mate

edit: for rb25

Edited by Phantom32

For the TR43 standard on RB25det, turbo will respond from 2000 RPM and kick in full 20PSI at 4000RPM. This is a very responsive and torquey turbo that we recommended to drifters. The high flow will be around 300 RPM less in responds (2300 to 4500 RPM from 0 to 20PSI), It can hold upto 25PSI of boost, and will give you massive mid to top end power. Should be getting around 270ish with TR43 standard on RB25det and over 300KWs with TR43HiF turbo.

For RB20 we can supply you the full kit of:

Tr43 440HP turbo (250kws wheels)

high mount T3 manifold

38mm external wastegate

braided oil feeds

dump pipe bend and fittings

total: $1550

Add $50 more we can high flow this turbo to 500HP (300kws wheels)

That is a really great price.

Well, for warranty side we follow the warranty and service guide from Garrett. Its called "Turbo and CAC Fundamentals". The warranty will be void: due to Liburication issues, foreign object damage issues and faulty workmanship. I have uploaded a copy at:

http://www.digi-hardware.com/TurboCACFundamentals.zip

Its a 96MB file which contains detailed information on turbo installation, trouble shooting and damage analyse.

To install on a RB25 its best to get the TR43 full kit at $1550 including manifold, ext wastegate, Turbo, oil feed, and dump pipe.

To install on a RB25 its best to get the TR43 full kit at $1550 including manifold, ext wastegate, Turbo, oil feed, and dump pipe.

Thats a really good price for a whole kit.

Does it have to be high mounted?

It can't be low mounted on the stock manifold?

And isn't the TR43 internally gated eliminating the need for an external wastegate?

Or its just better to go for the kit for the best results?

Sorry for all the questions man :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...