Jump to content
SAU Community

Recommended Posts

hey Cara,

should go 18x9 on the front as 18x8 will sit inside the guard heaps. :(

You mean 19x9?? He's right how come they come 19x8 front and 19x10 rear, such a big difference between the front and rear!! And also you should stretch some 235 or 245 on the rears in stead of 275!! All in all yes the wheels will be a nice look!!

You mean 19x9?? He's right how come they come 19x8 front and 19x10 rear, such a big difference between the front and rear!! And also you should stretch some 235 or 245 on the rears in stead of 275!! All in all yes the wheels will be a nice look!!

yeah my bad, relised after i wrote it.

even could go a lower offset to get more dish.

hahaha

nah i really want 275's on the back lol i just loove the fat tyre look hehehehe

not sure why they are 19x8 on the front and 19x 10 thats just the way they have done them i guess........ might go 245's on the front perhaps?

and i got a new job today!!!!!! yaay! start 2morro...........im a cook at Alaska Foods :(

Edited by MissR34
hahaha

nah i really want 275's on the back lol i just loove the fat tyre look hehehehe

not sure why they are 19x8 on the front and 19x 10 thats just the way they have done them i guess........ might go 245's on the front perhaps?

and i got a new job today!!!!!! yaay! start 2morro...........im a cook at Alaska Foods :(

Nah don't go 245s on the front, I have 8.5 front with 235 and there is no stretch what so ever, I'd be sticking with a 235 if i were you, or you might get inner guard or outer guard scrubbing!!

Edited by Deluxe
Darren will you be traveling to any of the VIC state series races this year??

Yeh well after talking with Brad in the Saloon Car we were hoping NOT to run the National Series and wanting to win the SA and VIC state Champs in the one year, so hopefully i'll be going for all rounds but not sure as yet. And as for Strat and the IP car, I think we were supposed to do the next Sandown meeting with the Boostworx boys, but our car is under going some 33 brake upgrades, so don't think we will make that one, but hoping to do a Sandown meeting and possibly a PI meeting!!

I'm assuming your going over for most??

Yeh well after talking with Brad in the Saloon Car we were hoping NOT to run the National Series and wanting to win the SA and VIC state Champs in the one year, so hopefully i'll be going for all rounds but not sure as yet. And as for Strat and the IP car, I think we were supposed to do the next Sandown meeting with the Boostworx boys, but our car is under going some 33 brake upgrades, so don't think we will make that one, but hoping to do a Sandown meeting and possibly a PI meeting!!

I'm assuming your going over for most??

Hopefully living there soon, got an interview this week end over there. I should be at all the Vic rounds with Intermarque. First round in March should have a full capacity grid

Hopefully living there soon, got an interview this week end over there. I should be at all the Vic rounds with Intermarque. First round in March should have a full capacity grid

Yeh thats the one i might be going over to, I'm in Sydney on the Wed-Fri beforehand, BUT Brad sold his AU to the VIC state champ for cash he couldn't refuse, and he baught his old EA off him before also, So were hoping to borrow the EA for shits and giggles and to get some points........ He still hasn't dropped off the AU so we might have to drive over Friday night after Syd!! All the Boostworx boys will be there i think, so keep your eye out for them and Tony and his 808 has the lap record there!!

Nice work on the interview and Good Luck!!

magnetic?

LOL, that would take some magnet LOL

The giveaway is the ring of bolts inside the rim (what could they be for if the wheel hasnt got a centre?)

The other hint is that the inside diameter is is smaller on the far side. The wheel looks magic from this ange but its easier to see whats happening if they show you the other side, its more like a giant bearing with a tyer on the outside.

how the hell does that bike work with no hub? im just stupid i guess and cant work it out :banana:

hit the link at the top of my post in the wasteland, there is a whole gallery in there.

here are a couple more pics of it

8677_180108125932_18.jpg

this one explains it :)

8677_180108125937_26.jpg

not sure how well it would stop tho

**not that u wanna be standing on the rear brakes too much :ermm:

Edited by bezender
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...