Jump to content
SAU Community

Recommended Posts

is one better than the other?

and has anyone done a 26/30 with a Getrag hanging off it?

Hey Luke, get a price for 2 bud ;)

think that the S2 motor is the same as the 31 block, im sure ryan will know the exact bits tho

think that the S2 motor is the same as the 31 block, im sure ryan will know the exact bits tho

The series 1 VL block doesn't have any oil, coolant ports on the side of the block, nor a return point. They were all blank when they were casted. The series 2 and the R31 RB30 blocks are identical in the fact they have the Plugs in all the feed points. Km's wouldn't phase me either on these blocks as they are brilliant castings. Pulled the head off a clapped out rb30 with 440,000km on it only to find it still had original hone marks on the bores. You wouldn't go to the trouble of twincaming an rb30 without a freshen up anyway.

Edited by Ryanrb25

Wow! A lot happened on the SAU-SA soap opera today. I knew I should have set my video before going to indoor soccer.

So let me get this straight:

Cruises have finished? :O

SAU gangs have formed? ;)

Police are to be notified everytime we start our cars? :)

And everybody here has sand in their...body? :P

You all make me LOL! Thankyou. Peace.

picked up the 200 yesterday. epic fun. :P

anyone knows whats happend to that Sly GTR today? apparently had a mishap on main north rd near the ford dealership. Hope its nothing major.

yeah, saw that, saw him cruising up north east when i was headin in to pick up the 200, and then parked up and looking somewhat worse for wear not too long later near the ford dealership. mad me sad. :)

shotgun his front bar. but yeah sucks to hear, hope it isnt to bad.

wasnt much left of his front bar. took a nice hit to the front right corner.

Just took the 31 down to the boys at Aussie Dyno (& Mufflers) to get a new cannon coz i snapped mine off lol. Very helpful and polite guys! And now that im on uni holidays, time for all the other pointless crap to go in that i had just lying around ;)

RIP ... Wendy Van Gasteren

http://www.news.com.au/adelaidenow/story/0...008-910,00.html

Killed 2 years ago today at O'Halloran Hill by motorcycle colliding with a pedestrian and then traffic behind not seeing her.

Was one of the best friends, neighbour, riding buddy you could ask for.

A tragic loss to the motorcycling community in Adelaide, who co-coordinated with me a few awareness programs. Not forgotten.

Ride safe, drive safe.

;)

Edited by RubyRS4
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...