Jump to content
SAU Community

Recommended Posts

Okay, so get this. I was noticing that my forum posts were getting a little pale, and washed out, so I went to the local office supply store to get a new ink cartridge for my keyboard, and, would you believe it, they didn't have any. I mean, I know my keyboard is getting on in years, but is that any excuse not to carry the refills? Do they really expect me to buy a new keyboard every year just to keep up with them? Anyway, I figured that maybe it was just well hidden, so I cornered a clerk and asked him where the keyboard refills were, and he just stares at me! So I ask him again, and he says he doesn't know. So then I ask to talk to the manager, and he says he'll go get her, and as he's walking away from me I can clearly hear him laughing under his breath. That's just rude.

Moments later Linda, the manager, comes out, and I ask her where the keyboard refills are, and get this: She tells me that they don't exist! Now I've had to put up with a lot of crap through the years as a consumer, but this was a new one, even to me. I mean, if you don't carry the damn product, just admit it! Don't lie to me just to cover up your failings. I mean, does she think I'm an idiot, or something?

Anyway, to make a long story short, I don't think I'll be shopping there anymore. I would go into more detail, but it suddenly occurs to me that I need to go order a new ink cartridge somewhere online before I run completely out of ink.

CA18DET, loom, t28 turbo, fmic, full exhaust, ecu, surgetank setup with external pump also, aftermarket manifold and gearbox.

its a full drop in and go!

wats it worth?

Edited by rad32
CA18DET, loom, t28 turbo, fmic, full exhaust, ecu, surgetank setup with external pump also, aftermarket manifold and gearbox.

its a full drop in and go!

wats it worth?

Ill sell you my complete 220kw CA18 setup but you aren't going to like the price. Cost of the parts including engine, trans, GT2871R, 1200kg extreme clutch, exhaust, inter and oil coolers including hoses and piping loom, custom billet parts, tuned ECU (3 day tuning) basically everything you need is $10,400 and i'll be selling it for a bit over half.

PM me if your interested. LOL

Edited by D_Stirls
are u one of the girl guides that helps with the flags at dawn service...

i hope it f**king pours

except when we're outdoor doing dawn service. but if it does, so be it.

bacon n eggs with the diggers is worth a few drops of h20

-D

nah, not dawn service my friend. we're armed and not so dangerous for the main march (read: rifles but no ammo unfortunately). keep an eye out near the rear of the march for the current active units. I'll blend in with the rest, but i'll be in amongst 3rd Field Squadron, Royal Australian Engineers

nah, not dawn service my friend. we're armed and not so dangerous for the main march (read: rifles but no ammo unfortunately). keep an eye out near the rear of the march for the current active units. I'll blend in with the rest, but i'll be in amongst 3rd Field Squadron, Royal Australian Engineers

ahh. they given u a 303 SMLE or a FN FAL ?

I used to do that march when I was an army cadet... a loooong long time ago

was always an interesting day

-D

Freebies anyone? I wouldnt use it personally but hey its free use it on a daily or something haha http://www.turtlewax.com.au/sample.php

still waiting on my chamois from last year... wonder where did that go...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...