Jump to content
SAU Community

Recommended Posts

Cara you will need to sell your wheels to clear the brakes. You will need 18x8/18x9 +30 at the highest. Even my 18x10 +18 on the front, another 1-2mm and it would hit. Just make sure u choose the right offset and "disc" design on the wheels to make sure it clears.

Screw spacers, dangerous, stupid and illegal. Not to mention, if you are caught with them in an accident, insurance companies aren't generally too happy

Just get rims that fit correctly in the first place

Regardless, if I were to drive a car anywhere I wouldn't do it with spacers... that's just me though

yeah i just removed mine a couple weeks ago... the wheels look a bit better without them in my case...

cara dont u have 19's ? surely that should clear the calipers?

-D

Just because she has 19's Ben, doesn't mean she has a decent enough offset to clear larger calipers.

Good idea Steve, but I still don't think they are legal

not by rule of thumb but most 9's have a fair amount of caliper clearance considering people often need the bigger rims to clear the big calipers/bigger discs... its a chicken/egg thing

and ive seen her rims, theyre pretty bloody huge :laugh:

-D

Edited by Dohmar

i wouldnt say bolt on spacers are dangerous. I used 25mm on the back of my 31 while drifting for quite some time. They will be going back on the front sometime soon also. Never had a problem. Just make sure you buy hubcentric and get them from somewhere reputable. Adelaide tyrepower is where i got mine from.

cara, if youre spending $xx,000 on an engine package, $2k for some low offset jap (or china, whatever) wheels isnt that much of a stretch is it? sure spacers are a good short term fix, but buying proper wheels would be better.

but then, thats me, im getting annoyed running 5mm locating ring. :down:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'd be worried about having to parallel park a boat like that. Magnificent car though.
    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
×
×
  • Create New...