Jump to content
SAU Community

Recommended Posts

Mitch, dont let your tits leak, im only trying to help mate.

if you have never appealed a licence disqualification then you are well within your rights to appeal

this one afaik.

Damo, i didnt buy the 31 wagon mate, the oil looked like iced coffee. (cracked head/gasket)

havent got round to changing my profile

Fking maggi 2 minute noodles are shithouse. Baked not fried = failtown. Hadn't had them for fking ages and now I'm reminded why :D

In othe news, Bee*R limiters are made of win. RB + straight pipe + limiter = fun times.

Edited by AndrewJZX100

if you havent had to appeal before you should have nothing to worry about Mitch...

I got done for disobeying a traffic sign, which was 3 demerits - this was quite a while ago.

when i had to appeal, (I attended the Holden Hill court), the court room was packed full of P platers appealing their license, and one by one you get called up, judge reads your letter from employer, and sends you on your way with 1 demerit point. I then got a letter in the mail stating this (last demerit point warning), and i had to attend one of those driving intervention meetings.

i got caught with no p plates.

its a minor frigging thing !

reckon i have a chance of getting off ?

edit// i got done for speeding last october and i learnt my lesson from that , and then i got caught with no p plates in my dads work car.

Well I've looked up the law - says that you lose your licence alone for not displaying the p-plates however it doesnt say that its mandatory.

The speeding ticket will have given you 1-3 demerit points depending on the speed. Now, there is legislation to change the 'not display p plate' penalty to 2 demerit points rather than a loss of licence, however it doesn't come into effect until january 2010. This is where lawyering comes in handy

You can employ a lawyer to negotiate with the prosecuting sergeant as to what charges you will face and if there is any way he can convince them to charge you with a lesser offence. Once that happens, he can delay the court case for a fairly long while, and then once you actually do face court there is a good chance they can point out your virtues and impress the magistrate with character references and the like. A magistrate wouldnt want to take your licence away if you need it for your income, however if the law doesn't allow them to negotiate then I'm afraid its bad luck. In negotiations with the magistrate, the lawyer can request that they extend your P's or put you back to P1 rather than P2 (or is it the other way around?) or put you on a good behaviour bond, etc.. only they know the tricks of the trade which is why its worth fighting for if your income depends on it.

If he can delay your case till Jan 2010, and the penalty is taken from day of sentencing rather than the day of offence comitted, he might be able to get you down with 2 demerit points- however you'd have to make sure that those demerit points wouldn't put you over the allocated amount at that time. The only problem with delays is if your licence has been automatically disqualified and you cant drive at this moment.

-D

picked up some genuine nissan coolant today, so ill probably flush and fill tomorrow. and i mounted my hid ballasts out of the way (stole chads idea), its so ninja spec.

Wing looks ace as fk Dave, digging it.

Give me a yell when your rig is back on the streets, keen to hit up more drives.

cheers dude. will def give you a buzz when its back on the road. itching to go for a drive. its a couple days short of 2 months now.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...