Jump to content
SAU Community

Recommended Posts

anyone know wat ecu i can go for seeeing as i cant find a CA18DET PFC?

and to lock my diff :(

cheers

Anything wrong with a remap?

It'll do everything and more that a P-FC will do (infact it is better as it retains the knock control that you lose with P-FC) with the exception of the hand controller and if you want something like that just pay $400 for a NIStune board and you can plug it into your laptop and bring up more info than the hand controller will give you.

Edited by D_Stirls
I've never been told off before :)

They only tell you off if by sliding you are going to b causing others to crash into you....which can build up to a massive pile up and many karts being broken lol.....best effort in breaking karts at an event so far has been 3 for my events

it aint how you stand by your kart

ive never been told off either including the 1 time i lost it trying to get it 2 far swideways :(

motivational pics

post-31501-1246449646.jpgpost-31501-1246449660.jpg

Good motivational pic there Dan

If anyone is after Motul Gear 300 75w-90w 100% synthetic gear box oil i have a 25L drum of the stuff. I'm selling it for $32 dollars per litre. In shops this goes for $43+ per L.

Let me know here or via pm if you need some.

Might give you a yell soon Luke, gearbox is well over due for fresh blood

Let me know when your going to get that coz i will most likely need this done to my line as well

so, im lazy and have only just started searching, but i figured id ask anyway...

... anyone know where i can find ecu pinouts for the s14?

Try NS bro

andrew just gave me a call, he's coming by this afternoon to mock up my t/b intercooler piping, and expects to have it ready by tomorrow arvo. :)

Try NS bro

found it about 10 minutes after i posted. :)

well...after sunday's fuel tank issues...monday saw the car struggling to get fuel which saw me creeping up south road towards junkfood corner at 5km/h :( ....the wife took the pump out while i was at the chiro and i found a few clamps loose that were holding the 040 into the stock cradle...moved the pump up and tightened the clamps and test drover...problem solvered.....so i thought...going to work the next day and was getting surge issues and the car was backfiring and carrying on like a pork chop....took the pump out last night..then went to my mates place to pick up my old "holy" tank to get them side by side..the tank i'd bought was out of a S3 R31...my tank was the same on the outside but different on the inside...so i went to my mate that i bought the tank from..and had a look in the back of his S2....exactly the same as my old tank.....There lies the problem...mine is an early 88....one of the first..so it carried on some of the S2's parts....including the fuel tank :) ....tonight im going to grab the tank thats in his spare car...and friday night swap them over on the hoist at my other mates shed over a few bourbons.......Damn skylines!!!!.....Bloody vintage car...

THE END :):bunny::):bunny::blink:

God I love it when you ghetto repair some drift damage and it actually turns out well :P

Munched the front corner of the sil a few nights ago. Nothing major just a bent guard, scraped front bar and parker light was MIA.

Bent the guard mostly back out, masked up the lights and gave her a quick spray and from a distance you almost wouldn't even pick it :D. Just chucked one of those crystal parkers in there (gay looking thing) for now until I get another stock one from JIS tomorrow - then it should be almost back to former glory :P

Now to make sure I avoid Clems tyres on satdy evening :(

geez, this day is dragging on! anyone got any cool shit to post up?

Your not wrong there Damo.....i thought the clock said 4:24pm but that motherf**ker is saying 3.24 now....this is just not right

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...