Jump to content
SAU Community

Recommended Posts

yeh i do a bit, had a blue one with a high mount high flowed t25

the gearboxes are crap especially reverse, and the factory computer is also crap as it is located under the passenger seat which is easily knocked by the passengers feet which in turn pulls out the loom

other that they are a great little FWD car

sounds like the one my mate josh had a while back, not sure what he did with it tho.

think it had guages in the dash?? ..........

TO THE PEOPLE THAT I MESSAGE ABOUT THE STOLLEN LEGNUM

It's been found in Seaton on a blind corner, tourched out.

My mate's going to go have a look at it tomorrow afternoon but there's a P.I. wanting a interview with him about it all. Should be fine considering he did nothing wrong and it's most likely routine for insurence reasons.

Stupid faggots who steal shit because they are too shit to get their own job and earn things like everyone else should be shipped over to some shithole country and get rapped!

TO THE PEOPLE THAT I MESSAGE ABOUT THE STOLLEN LEGNUM

It's been found in Seaton on a blind corner, tourched out.

My mate's going to go have a look at it tomorrow afternoon but there's a P.I. wanting a interview with him about it all. Should be fine considering he did nothing wrong and it's most likely routine for insurence reasons.

Stupid faggots who steal shit because they are too shit to get their own job and earn things like everyone else should be shipped over to some shithole country and get rapped!

That's terrible mate, atleast he had insurance, that's one saving grace of the whole thing. You're right though, these bastards should be out their EARNING a living, not stealing their way through one

sorry luke (enr) i thought i sent it to my whole msg book, guess not :)

and nah, its not that chicks car it was my other mate who had the dark green manual one with tiens, vskf's etc. i had it forsale on ns.com but got stollen from the bay around 3ish. left it for 20minutes he said. pics of what it looked like before the fire here. such a nice car :worship:

http://www.nissansilvia.com/forums/index.p...p;#entry5224372

yeah its most likely stripped and tourched but ill find out more and get pics tomorrow.

sounds like the one my mate josh had a while back, not sure what he did with it tho.

think it had guages in the dash?? ..........

it had a bodykit and was resprayed blue with pearl through it, the instrument cluster and dash surrounds were sprayed red, had monstar tacho and shift and boost gauge on the a pillar and a black interior

She says a lot of things, she said to me she told you that you were awesome because she didn't want to hurt your feelings, sorry man :D

devo'd. she still owes me a fifty though.

what, are you telling me you havent pop rivited sheets of metal to the side of your car?? i call lies!!

fibreglass my fishy friend.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...