Jump to content
SAU Community

Recommended Posts

not convinced about Ladyboy Gaga just yet, but until confirmation....

must_not_fap2.jpg

oh, and just heard on the news that a Skyline was driving erratically on a reserve off Gorge Rd, Athelstone last night. Apparently residents reporting it to the police on fire somewhere in the area. If it was thieves, sorry to the owner, if it was the owner, tough f**king luck.

well, the 200 made 171rwkw. dirty and untuned on 14psi (the turbotech wouldnt go lower without fallin apart...).

its leaning out a little bit in the top end though. thinking afm might be a little out of it.

now shopping for a z32/r33 afm (whatever will see 220rwkw and be cheap, lol) and a fuel pump.

also dropped in on w.e.b suspension/modbury tyrepower and had a look for that knocking noise i can hear on corners.

dave who works there spent the better part of an hour checking basically ever nut, bolt, bush and bearing in the front end. all sweet.

then we noticed the passenger side engine mount, its pretty much farked. so ill be hunting for a new set of mounts me thinks.

best part is, he didnt charge a cent, which was pretty awesome considering how long he spent under my car...

Edited by scandyflick
well, the 200 made 171rwkw. dirty and untuned on 14psi (the turbotech wouldnt go lower without fallin apart...).

its leaning out a little bit in the top end though. thinking afm might be a little out of it.

now shopping for a z32/r33 afm (whatever will see 220rwkw and be cheap, lol) and a fuel pump.

also dropped in on w.e.b suspension/modbury tyrepower and had a look for that knocking noise i can hear on corners.

dave who works there spent the better part of an hour checking basically ever nut, bolt, bush and bearing in the front end. all sweet.

then we noticed the passenger side engine mount, its pretty much farked. so ill be hunting for a new set of mounts me thinks.

best part is, he didnt charge a cent, which was pretty awesome considering how long he spent under my car...

Still very very respectful figure. Nice you got the knock source kind of sorted too.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...