Jump to content
SAU Community

Recommended Posts

now that is some funny shit hahaah

Yep, having watched the normal AND the Unrated versions of Sex Drive - top movie in both forms! The beauty of the unrated one is the random naked chicks running through the set for no apparent reason every so often .... classic.

what happens if you plug up both breather on an engine ;) what can break/fail/die?

what happens??? a small somalian child dies...thats what happens.......

actually...its not good to block both breathers...thats why they are called breathers....its part of the crank case ventilation system..you block them off and the vapours caused by the cavitating oil in your sump will try and find the easiest way out...which means your timing cover and rear main oil seals will be the first things to leak....

actuall it surprises me how coherent i am this time of the morning without my coffee :D

Is it just me who is getting no reponse (not loading, page cannot be displayed etc.) from the SAU website sometimes in the last week? like 2-3 minutes ago?

I get it all the time. I'm sure the gurus are working on it.

every now and again it takes AGES to load, but only stalls for about 2 mins and is then back up.
I get it all the time. I'm sure the gurus are working on it.

Okay cool, so its not me then. Ive been having a few dropouts lately which I never had before, but its obviously un-related and also I cannot access anything when it does it.

Okay Im off to bed, last nightshift tonight... THHHHHAAANNNNNK GODDDDDDDDD

anyone else a big fan of dexter? love it! got S1 and S2 at home, almost finished season 1.

awesome show, i finished season 3 earlier this year

season 2 was the best imo, the ending is brilliant!

the show's addictive - if you start watching it a few episodes into a season (on TV) [edit - i reccommended it to friends of mine and they couldnt get into it], you wont be interested. gotta watch it from the start!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...