Jump to content
SAU Community

Recommended Posts

Ok i know there is 100 topics on Intake Pipes however they all point me to my local exhaust shop or go on nengun..

But what im asking is has anyone got theres made for an r32 in victoria, and where and how much.. cauz id rather go to a exhast place that has already made one so i dont need to explain too much.. im not fussed about driving a while so anywhere in melbourne is ok..

and pics if available..

thanks..

Link to comment
https://www.sau.com.au/forums/topic/188762-metal-intake-pipes/
Share on other sites

Pretty much all workshops listed in the "Workshop" sticky, will be able to have one made for you without a drama in the world.

I cant remember the R33 setup, but its probably not a lot more than a mandrel bent bit of pipe.

If you took it off, and take it to a semi-decent fabricator they should be able to make it the same :thumbsup:

Thanks for the replys but im not sure where chasers motosport is and i tryed ns.com and it took me to some pc site..

just to make sure im talking about something like this:

http://www.skylinesaustralia.com/forums/t1...;hl=intake+pipe

R31Nismoid will the workshops listed be able to make something like this..

All my fabrication work has been done at EAS Performance, details below, in my sig. In the pic you'll see the IC and intake pipes, also the airbox have all been done by EAS.

He has also done intake pipes to fit the standard airbox.

I'm upgrading, again, so all that work is being redone :thumbsup:

post-1811-1192010138_thumb.jpg

just to make sure im talking about something like this:

http://www.skylinesaustralia.com/forums/t1...;hl=intake+pipe

R31Nismoid will the workshops listed be able to make something like this..

Easily dude, the work done in the link you provided, its backyard grade (no offence to the maker).

Or get one of Bass's silicone parts :)

hmm i dont really want a silicone one.. becauz one of the reasons i want a metal intake is to get a louder spool and blowoff noise.. :) but Al i like what u have posted.. defenatly worth lookin into..

and yea i can see that one is 'backyard' grade, once again no offence to the maker, but its the only one that i have seen that looks like the ones u buy.. from nengun for eg. with the 3" that goes into a wider cylinder.

iv been asking a few of my freinds if they knew any good welders and i might try get someone to make one up for me.. if not ill most likely go to EAS Performance or the workshops listen in this fourm..

Thanks heaps everyone i never imagined i would get this many replys.. all helped heaps..

All my fabrication work has been done at EAS Performance, details below, in my sig. In the pic you'll see the IC and intake pipes, also the airbox have all been done by EAS.

He has also done intake pipes to fit the standard airbox.

I'm upgrading, again, so all that work is being redone :w00t:

Don't whine just stop upgrading and give the parts to me ;)

Don't whine just stop upgrading and give the parts to me :w00t:

I got a nice, almost new, HKS GTRS waiting for a new home :(

Truth be told i already have at least 3 people interested in the turbo, just want to get it checked out properly before i sell it to a mate ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...