Installing Nismo 1.3 Bar Cap To Gtt

[Granthem]

Hi all,

I just bought a R34 GTT and have purchased a Nismo Radiator Cap. I am hoping to make the engine abit more visually appealing.

However, the nismo cap is for 1.3 bar, where as my standard cap releases at 0.9 Bar.

Im just wondering whether or not i should actually use it, as this is quite a large increase in pressure to my cooling system.

Any ideas and feedback would be great.

I just dont want to damage or cause any problems to my cooling system just to have it show the Nismo logo.

Cheers Grant.

PS i searched but couldnt find any topics to fit my question

[Ant97GTR]

Someone in Vic did this to their 34 gtt....then spent a fair bit of time on a skidpan which resulted in the radiators head tank exploding due to the increased pressure.

Basically don't fit unless you have an alloy radiator.

[Granthem]

awesome. I read somewhere that most nissan turbo models run 1.2 bar stocko caps anyway and the non turbos run 0.9..

Mine clearly says .9 and as far as i know its all stocko.

Oh well might make a good paper weight at work or something.

Thanks for the reply!

[Bass Junky]

erm....

[ferni]

Unless you're going to hold it on the limiter for a minute like Bass did then you'll probably be fine

[Granthem]

Haha thats the best video ive seen in ages.

In short... my car will never cop that much punishment. I wish it did, but i couldnt afford to break it lol.

So yeh, i can understand that sort of punishment will find the limits of the standard cooling system haha. but lets be honest, mine only does the daily job and sometimes cops a first to second gear. nothing really

I might put it on yet..

[STATUS]

Someone in Vic did this to their 34 gtt....then spent a fair bit of time on a skidpan which resulted in the radiators head tank exploding due to the increased pressure.

Basically don't fit unless you have an alloy radiator.

thats absolute bullshit, if your car is a shit box course it will have issues..... blame the radiator not the cap......FFS i can tell you now if it had std cap it would have spewed all its coolant all over the place then probaly cooked itself.... if the rad was in good nick it would been fine. think of it as fitting a bigger turbo to a tired engine.... not a good idea.

the whole point is to increase the pressure to raise the vapourisation point, works very well so well in fact i have them fitted to all the tow cars we use.

When towing the race cars around the old patrol (2006 model) used to vent the cap during towing and continue to pump the coolant out of the resevoir now it is sweet. Same with most cars that see track days or hills work.

best budget cooling upgrade available.

[raps86]

i have a 34 gtt and it has a greddy radiator cap thats at 1.3 bar and ive never had any probs. the car has the usual mods to it hks fmic, hks exhaust, power fc, spitfire coils. and the car is driven reasonably hard and it has never used a drop of coolant since ive had it

[salival]

Hi guys, thought i'd share my .25 cents.

I make alloy radiators for a living and service radiators..

Stick with 0.9 bar, if you're having over heating issues and need to go up in pressure, something isnt right..

The reason bass junky's radiator exploded was he would have had an old top tank on the radiator, these are always seeing the hottest water and if the motor is overheated at some stage steam kills the plastic in the tanks..

after years of hot/cold/hot/cold/steam cycling, the plastic gives away.. it's a simple fault.. some radiators being cheaper to fix/repair obviously.

I have an R32 GTS w/ rb20det in my skyline with a standard R32 GTST radiator that has been rodded out and a new top tank on it.. I can sit on the spot for hours with NO overheating problems and NO radiator-exploding-on-skid-pan problems re: bass junky.

Also, alot of the "greddy/trust/nismo" radiator caps are rebranded denso caps.. I will only ever use a genuine denso cap for my cars (0.9bar)

[Granthem]

yeh no heating troubles mate its constant and normal just below half way. was just using it to dress up the engine abit

[gotRICE?]

You should be fine man.

I had a Mugen 1.3bar on my Integra Type R, and they are known to have top tank weaknesses. Had it on for 3 years and was at the racetrack running 8500rpm constantly.

[n15m0]

Also, alot of the "greddy/trust/nismo" radiator caps are rebranded denso caps.. I will only ever use a genuine denso cap for my cars (0.9bar)

May I ask why is that? What are the cons of using a 1.3bar one?

[salival]

May I ask why is that? What are the cons of using a 1.3bar one?

Higher pressure caps will find the weakness in your cooling system..

either old heater hoses will pop, or the top tank will or turbo lines will or a heater core will leak..

As far as i'm concerned if the radiator has never been serviced and you put a higher pressure cap on it.. you're asking for trouble.. sure it may work fine, but its only a matter of time..

[STATUS]

Poor excuse for lazyiness^^^^ if its gonna go with a 1.3bar cap its gonna go regardless of cap pressure as it is already compromised.... time is the only differrence.

[ryano]

I agree with URAS, if you want to go racing or drifting make sure all your hoses are new ones (sillicon is best) not old, and that all clamps are quality and tight. Get your radiator rodded/cleaned out every year and wack on a 1.3 bar and Bobs your uncle.

Edited October 30, 2007 by ryano