Jump to content
SAU Community

R33 Gts-t Rear Shock Removal

V8EATER
 Share

Recommended Posts

V8EATER Apprentice

V8EATER

Posted
Posted

I have a series 1 R33 GTS-T.

When i reverse up the driveway i can hear a rattle that sounds like it's coming from the top of the right rear shock. I checked that all the bottom of the assembly is tight so it seems to be the top nut / nuts have come loose. I removed the carpet panels from inside the boot and can see the surround where the shock would sit inside but cannot find a rubber to remove to tighten the top nut / nuts. I searched through these forums and found 1 reference to it but it was based on an R32.

R32/33: Replacing Shocks / Installing Coilovers

It looks to me like i may need to remove the back seat, then the parcel shelf to get to it?

Any help or advice would be much appreciated!

Link to comment
https://www.sau.com.au/forums/topic/190550-r33-gts-t-rear-shock-removal/
Share on other sites
V8EATER Apprentice

V8EATER

Posted
  • Author
Posted
no problem.. alternatively you can smash the rear window and rip out the parcel shelf... thats how i removed them when my car was written off. :rolleyes:

After reading the "Skyline R33 Rear Seat Removal Pictorial Guide" (minus pictorial!!!) it might be easier to smash the window!

Skyline R33 Rear Seat Removal Pictorial Guide

mitchy_ Grand Master

mitchy_

Posted
Posted

its not *that hard*...

undo the bolts in the bottom of the seat, then the bottom will unclip (with a bit of force, i usually stick my breaker bar though the loop, and give it a pull upwards),

undo the bolts in the bottom corners of the top of the seat, and it will lift up and off,

then the parcel shelf should just lift off, and you are done.

sewid Grand Master

sewid

Posted
Posted

Takes about 5 minutes to have the whole back seats and parcel shelf out once you've done it a few times. Trickiest bit is getting the seat base out of the clips if your afraid you'll break something.

My advice is to have a crowbar and dont be afraid to break the clips as they wont.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Dose Pipe Sutututu · Posted

      Welcome back brother 
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • MBS206
      NC MX5

      By MBS206 · Posted

      I assume clearances were all a-okay?
×
×
  • Create New...