Jump to content
SAU Community

Recommended Posts

stiv10bq7.jpg

What do you guys reckon?

The redesigned front end along with the wide guards are a major step in the right direction, but it still looks kinda quirky to me.

The taillights definitely need some work though :P

I can see the potential in the looks department now, lets just hope the Subaru designers do to this what they did to the v7 for the next model.

More info and pictures here:

http://www.motorauthority.com/news/hatchba...wrx-sti-part-1/

Edited by Yawn
Link to comment
https://www.sau.com.au/forums/topic/190931-sti-v10/
Share on other sites

It still doesn't look like a WRX that's for sure. As the saying goes, "you can't polish a turd", and this is exactly what Subaru have tried to achieve with the new Sti. But they are aiming for a very different market these days with the WRX. I just don't see this same new market being the type who would buy an Sti. Unless it has cup holders for their latte's. Maybe the suspension will be a little cushier too? But of all things they got rid of the iconic 'Rex' note! This new gen aint no WRX and this sure as hell is not what an Sti should look like. Infact, they would have been better to not call this the WRX at all. But looking back, Subaru has failed on the styling department ever since the introduction of the 'bug eye'. I hate to think of the loss of sales over the years purely because of poor aesthetic designing.

Having said all that, the WRX and Sti are the best they've ever been mechanically going by all reports.

But as far as king of hot hatches go, the Golf R32 is king. Subaru really should have done a complete new front and rear end for the Sti at least. Aswell as bring it out in sedan form. Makes for a good sleeper I guess?

Link to comment
https://www.sau.com.au/forums/topic/190931-sti-v10/#findComment-3438730
Share on other sites

I still say they are going to sell like hotcakes. Also I think it looks good. Its just peoples perception of what a 'wrx' should look like.

Anyway it an impreza, not a wrx, the wrx is the 'trim level' for want of a better word. So go look at what your typical impreza driver is. I can tell you now its not your typical wrx driver, they will sell more base models than they will the top spec, as thats just the way it goes. This follows market trends and what people want, if you had board members breathing down your neck, what would you be doing? Go for something against market trends and hope it pulls off?

All that said I have heard they are looking at bringing out a sedan at some point, because remember the foresters have been based off the impreza so they need to do something there.

Link to comment
https://www.sau.com.au/forums/topic/190931-sti-v10/#findComment-3438779
Share on other sites

Yeah true, I agree with what dangerous daveo said about it being the perception of a WRX or STi, since it has always been a sedan.

I say if it starts demolishing everyone in the WRC then people might give it a chance, especially since certain reports have praised the mechanical side of things.

Whatever happens, to me it already looks much better than the base model which was :P

Just still having problems coming to grips with the STi being a 'hot hatch' :P

PS. I'd still own a v9 or v8 over this :P

Link to comment
https://www.sau.com.au/forums/topic/190931-sti-v10/#findComment-3439374
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...