Jump to content
SAU Community

Recommended Posts

Okay, this has been going on for a couple weeks and during this time I havent figured anything out nor any pattern.

I'll be driving like normal... not boosting or anything. I guess you can say like 40 mph or something. Then all of a sudden it will run lean for no reason and of course there's a loss of power. It usually catches itself. Sometimes it takes a second or two but then back to normal. Worst case is that it loses all power so I pull into a parking lot, leave the car in neutral and it catches back to normal.

Here's what happened today. I was driving and down shifted to second, came to a rolling stop then started up again. As I started up from my rolling stop there was a bit of hesitation then it was ok. About 20 feet away it did the same thing... this time I pulled over and shifted to neutral but it died by the time I did this. I started up and everything was ok. I drove for about four blocks and the thing runs lean again. I step on the gas a little and it only does worse by making the car jerk. So as the car rolls, I drop the car to neutral and suddenly and my AEM Uego immediately swings to rich. I shift back to gear and it is fine then dies shortly after being too rich... I think it was too rich... I didnt catch the reading on the Uego for I was in traffic. It died so I just turned the key to off then started up the car and it was fine the rest of the way without issue.

I have changed out the O2 sensor a couple days ago. I changed the fuel filter in August.

I have a RB20DET with stock ecu. Plazmaman intake plenum, HKS SSQV Bov, Tomei 256/8.5 lift cams, top mount stainless steel exhaust mani, T3/T04e, Tial wastegate 38mm, FMIC, stock injectors, Splitfire coils packs, Greddy Type S boost controller (off) and a Neo (+4% on high boost at 6000rpm and up).

Any ideas? Like I said before, it doesnt happen all the time. I drove to work and there was no problem. The temp. when this happens varies... no rain or moisture coming down. I am confused.

Thanks.

id probably look at getting bigger injectors and fuel pump with the retune as well.

as for the problem, afm, fuel pump and fuel filter are the first things that i would look at

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
×
×
  • Create New...