Jump to content
SAU Community

Recommended Posts

Hi Eric,

Your clutch selection will really depend on your driving style and power output. If you want to drop me a brief outline, I'll let you know what will work best and price.

Exedy (I think?) 4 puck sprung brass button clutch with a real heavy pressure plate. Handles the immense abuse I like to dish out :) Came out of my mates commodore, handled everything he threw at it until he got on the strip with slicks and 460rwhp.

I have a OS twin plate in my 31 coupe ..

The 31 race car has a extreme 9 button n holds up well with 338hp , its had no issues n competed in clasic challenge , dutton rally with 2 drivers n handled 1.7 60fts at drags , also run same clutch in my mates GTS 2 r31 and his wife drives it with no hassles ( her daily is auto )

I also have an OS Giken twin plate in my R32 gtst (300hp) and have drifted all year with it, kicking the clutch ocasionally and it still works fine. The clutch pedal bracket busted the welds though just the other day, but thats common and nothing a bit of welding can't fix:)

wouldn't use another extreme clutch even if it was free...

nismo twin plate all the way!

or if you dont want to spend that much cash 1k*ish will get you nismo super copper max single plate which inc lighten flywheel

Edited by [Michael]

looking at about 350hp when finished(when the missus lets me). have 270hp at moment and the one in there is also a 9 puck xtreme. had a bit of a look at it and worked out it may not be set up right as I only got to push it about 20mm to disengage the clutch. i sometimes rest my foot on the peddle between changing gears and this is enough for the clutch to start slipping under power. also may have a bit of air in line as it sometimes makes a small hydraulic squeek when letting out the clutch fast. its going in for a tune on tuesday so i will get the mechanic to bleed the clutch to see if it makes a difference!

Exedy h/d 5 puck sports ceramic - had it for a few months, grips real nice, but its been feeling funny lately... the friction point likes to move alot lol... even after its been warmed up

Sounds like what's happening to mine.. friction point moves to the floor and I lose the top half of the pedal travel..

I started a thread in Drivetrain etc but no1 has replied yet :)

http://www.skylinesaustralia.com/forums/t191728.html

Sounds like what's happening to mine.. friction point moves to the floor and I lose the top half of the pedal travel..

I started a thread in Drivetrain etc but no1 has replied yet :ermm:

http://www.skylinesaustralia.com/forums/t191728.html

Sounds like a hydraulic problem ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...