Jump to content
SAU Community

Recommended Posts

Spotted Isacc (Konrad) on Saturday at around 3pm on the storey bridge, I was in my car but you had no hope of seeing me I was in a side street!

Spotted Marc and Karen (Revhead and SMR33) at about 4:30 in coorparoo on old cleveland road...good waving guys :) I think we scared the guy in the falcon in front of you lol

Heh yeah coming back from Karen's parents' place :( The car in front of us blocked Karen's view while we were stopped and she was asking "Who? Where? Behind us? *turns, looks around*"

I had to dawdle off the lights so that the car in the turning lane didn't block our view :happy:

Heh it's all good. Check the guidelines (link is at the top left of each page) for what's acceptable and what isn't. If you're unsure, feel free to ask a mod or an admin. Welcome to SAU :blink:

White R34 on the gateway today, stock as a rock, but great choice for the girl driving it.

Was that just before the Kuraby toll & all the way through to Murarrie?

You had the front mount with the standard bar and no exhaust?

Edited by so_tred
Was that just before the Kuraby toll & all the way through to Murarrie?

You had the front mount with the standard bar and no exhaust?

That was me, I've got an exhaust? It looks like a stock twin-tip one...but $2K out of pocket says otherwise ;)

Nice choice of car, I did a double take as I was merging on looked sideways and saw another R34..doesn't happen that much.

Was pretty random that I was heading that way, I had to go to the Queensland Fire and Emergency Services acadamy for petrochem fire-fighting on that day.

I passed a dark blue r32 on my way home from work.... the person lives out near beauy... anyone know this person?

There is also someone who owns a black r33 in beauy with a few mods...

I passed a dark blue r32 on my way home from work.... the person lives out near beauy... anyone know this person?

There is also someone who owns a black r33 in beauy with a few mods...

Haha favourite memory from living out there is being told I drive "one of those new fangled cars" by the woman in the post office.

That was me, I've got an exhaust? It looks like a stock twin-tip one...but $2K out of pocket says otherwise ;)

Nice choice of car, I did a double take as I was merging on looked sideways and saw another R34..doesn't happen that much.

Was pretty random that I was heading that way, I had to go to the Queensland Fire and Emergency Services acadamy for petrochem fire-fighting on that day.

Ahhh...fair enough about the exhaust then :)

I did the double take too :)

spotted a white r33 plates MELS33, heading into newport at redcliffe,

and on possibly fleetwood street, a blue r33 with a black bonnet, black boot and black roof, covered in stickers. Nice ride, too many stickers to read lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...