Jump to content
SAU Community

Recommended Posts

Spotted a couple lines down the coast sunday night. Blue r33 with EVL84 plates, Silver series 2 near surfers, and a couple others getting around.

One that stood out was EVL84... dude I didn't want to race, after lining me up for a few km and me not trying should have been obvious =\

Yes, I boost off the lights sometimes, but that's because I was driving lazy, this does not mean it's on... =\

Spotted a White 31 out front of chermside westfields at about 1:30am on saturday morning, had a SAU sticker on the rear window. I was in my 31

Oh and Col, ARE31 is a aussie delivered GX, running a lightly modded RB30e, he regularly enters the drift practice nights at QR

Spotted on way home today around 5pm:

White R33 with LED tail lights heading north just before the tolls

Black R34 heading south just about to drive up the gateway bridge

White R34 heading north on the gateway, looking damn sexy.

Any members?

Spotted on way home today around 5pm:

White R33 with LED tail lights heading north just before the tolls

Black R34 heading south just about to drive up the gateway bridge

White R34 heading north on the gateway, looking damn sexy.

Any members?

I'm prob the White R33 with LED tail lights, haven't seen any others with em.. 400R Nismo Series 2 Front Bar.. eg instead of large side vent, its two slotted vents.. very dirty at the moment.. been in the shop over the past 7mths.. just back on the road and well going back into ALLSTAR @ Geebung tomorrow for some fix ups.

Drive gateway everyday except Thursday and Sundays - Deagon to Tingalpa.. with the 2 Alpine 12" Subs usually kicking some sort of music..:cheers:

Did see a couple Skylines too, R34 4 Door.. shit they look nice, anyone wanna swap? Did see a S1 R33 heading south on the gateway today too.

I'm prob the White R33 with LED tail lights, haven't seen any others with em.. 400R Nismo Series 2 Front Bar.. eg instead of large side vent, its two slotted vents.. very dirty at the moment.. been in the shop over the past 7mths.. just back on the road and well going back into ALLSTAR @ Geebung tomorrow for some fix ups.

Drive gateway everyday except Thursday and Sundays - Deagon to Tingalpa.. with the 2 Alpine 12" Subs usually kicking some sort of music..:D

Did see a couple Skylines too, R34 4 Door.. shit they look nice, anyone wanna swap? Did see a S1 R33 heading south on the gateway today too.

Yeah, that would have been you, I remember the front bar.

I'm the 4 door :cheers:

Pritty sure i spotted Pear, in the blue r34 (im jealous) with the gold and silver rims, right before toombul shops around 2 or 3 ish. :cheers:

Edited by Silver_R34_GT-T
Yeah, that would have been you, I remember the front bar.

I'm the 4 door :P

Excellent, don't look too close at the Front Bar, it's cracked worse then a crack whore on a binge... :D I'll be fixing the far rather then replacing it as, its a one off fitment to my car.

There's a white R33 skyline heading south from Wynnum Rd onto the Gateway usually about the same time I am (5:00-5:20pm) turning north on to the Gateway at Wynnum Rd.. has a veilside rear bar, unsure of the front maybe a Jun or Trust bar very sexy... Kinda rear bar I wanna get with a diffuser.

There's a sexy Metallic Grass Green Skyline at Allstar Tuning too at the moment thats been gutted.. very nice paint job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...