Jump to content
SAU Community

Recommended Posts

Spotted CYA34 near Logan Hospital today.....nearly needed to pitstop into the hospital to get some Oxygen due to the wildly high octane fumes from it's zorst :w00t: What you runnin in that beast??

He is running plenty I tell you.He is running it in at the moment and it is really fueled up.

Whet past that performance shop in Mount ISA yesterday that OI saw last time I was there as there was 4-5 skylines there last time...

Forgot the name of the shop last time so I thought Id just take photo of it, not sure how good they are but everytime im in Mount ISA there is 2-3 skylines out the front...

This is a pic of the shop (look to the very right you will see a purple GTR)

1.jpg

This was parked out the front of the shop and I posted a pic of the same car in this thread back in June from my last visit up there... (looks like my car)

Original photo from back in June sometime...

mtisa2.jpg

Current photo taken yersterday, this car looked HOT!!! (Maby im bias to yellow)

2.jpg

This was a GTST with GTR badges and a space saver on that I saw driving round;

From the front,

4.jpg

From behind,

3.jpg

This is what happens to your car if you park it on the side of the road for too long, I also saw about 6 others with smashed windows and had been just generally destroyed all on the same street... Not all of the cars were VN's two were what looked to be nice Jeeps before they got stolen and dumped, the street must just be the place to dump stolen cars...

5.jpg

What you do with your spare time in ISA???

6.jpg

Glad to be home again!!!

spotted a red r32 driving along anzac avenue from rothwell to redcliffe, driving like ten k;s under the speed limit the entire length of teh road....

had lighting decals or paint arcoss the side and front and like 8 sets of lights on at the front

Spotted Jeremy (Traditimeour) on Ipswich road, Morroka about 10 minutes ago....I was in the black R33.....

Saw you this time. on my way to sit in the hospital for 4 hours. fun :laugh:

Saw a metal blue r33 sitting at plaza car park yesterday plates ***KDB, and also seen a grey r33 today at plaza car park plate number **DMD, and also a white series 2 r33 at the lights on the new maroochydore road at 3pm today.

Hospital? Yikes! Hope everything is ok.

:D better than a roo i've heard stories off. nasty animals.

oops, spotted two other lines on way home. at lights on beaudesert rd moorooka

Edited by Traditimeour

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...