Jump to content
SAU Community

Recommended Posts

spotted around 12ish today on anzac avenue on the over pass over the hhighway, a silver r34, plates weere pht34 . had a largish size person driving, i think it was a chick with a really short hair cut :P anyone on here?

just spotted outside nearmy work springhill black R33 with side crash rego 239.KKR anyone on here? if you are better move the car before the building owners get it towed.Parked on barry street springhill

Spotted a Black R35 GTR (yes thats right, R35) in boronia heights at about 11:45am driving down towards greenbank... as far as i understood these arent street driveable yet? can anyone confirm? i thought they were only for track use at present

Looked beautiful, soo nice and shiney, didnt catch the plates since i was too busy staring at the car!

Spotted a Black R35 GTR (yes thats right, R35) in boronia heights at about 11:45am driving down towards greenbank... as far as i understood these arent street driveable yet? can anyone confirm? i thought they were only for track use at present

Looked beautiful, soo nice and shiney, didnt catch the plates since i was too busy staring at the car!

if i saw one i would follow till they stopped and had a nice long chat hopefully ending in a drive

keep spotting this white, r34 with some tribal graphics on the boot, no wing. Gold Coast. you on here??

Yeah I've seen that one around heaps, with a full bomex kit + no wing. It's nice. I saw it yesterday doing laps at sufferers parasite

some other skyrines I've seen recently:

saw GTT23(silver 34) at garden city friday night

Also saw a black 33 travelling up kessells road, near the old ANZ stadium some time last week, it went pretty good. Is it anyone on here?

Spotted a Black R35 GTR (yes thats right, R35) in boronia heights at about 11:45am driving down towards greenbank... as far as i understood these arent street driveable yet? can anyone confirm? i thought they were only for track use at present

Looked beautiful, soo nice and shiney, didnt catch the plates since i was too busy staring at the car!

I saw the same one when I was on my way down Middle Rd... had many a glance to see if I was mistaken cause I didnt think there were any R35's in this neck of the woods yet.

keep seeing a white r33 along johnson road,, driven by a chick, on my way to work in the morning

always in the work car, so no point waving

That would be my line you see. Just dont look at the front bar :ninja: been to lazy to fix it up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...