Jump to content
SAU Community

Recommended Posts

Originally posted by Jelyfunk

Whilst we are on the subject, who owns the Gunmetal R33 GTST that blew away that worked WRX along the Robina Parkway down on the Gold Coast last Saturday Night week?

Looks like a Mspec bodykit with Black plates (can't remember the numbers) very nice car.

Man your car is quick, that Rex has had me twice in the last week (and I usually take them) But you fed him his lunch, it was so cool, he was so pissed at the next lights cause me and my mate were laughing at him.

Ummmm......... Guilty as charged orificer! :mad:

Yes that guy in the WRX had been hassling me down the highway for about half an hour. Thought that it was time to show him what Skylines are capable of.

To any cops reading this NO laws were broken, we didn't break the speed limit, I just got up to 70Kph a lot faster than he did, NO wheels were spun; NO exhausts were screaming over 91DB; NO loud BOV as we didn't go over 2000RPM.

To any cops reading this NO laws were broken, we didn't break the speed limit, I just got up to 70Kph a lot faster than he did, NO wheels were spun; NO exhausts were screaming over 91DB; NO loud BOV as we didn't go over 2000RPM. [/b]

LMAO!!!!!!:bahaha:

Originally posted by Squish_Boi

hey boys and girls, im new here.. yay !!!!:D  

i jus brought a 33 pretty stock at the moment but im happy...

Let me be the first to say welcome aboard Squish_Boi

What did ya get GTR? GTST? GTS4? etc....?

Colour? Year?

was neone on here the guy that did a really sweet drift from beaudesert road onto granard rd on sat saturday. I was the pasenger in a really sweet slammed and kitted up silvia, the offender was in a silver r32 gtst, and gave us a wave and thumbs up i beleave, it was a sick drift!!

I was at cootha around 11pm... I'd never been up Cootha or Nebo before (after 4 years in Brisvegas)... it was cool. I think that the indicated speeds on Nebo are insane. could you imagine grandma in her kingswood tackling Nebo at the speed limit. scary thought :P

It's the bonnet that UAS in Sydney sells. They're $1100 +$100 postage which is a fair bit for a bonnet but my old one needed to be replaced so when you factor in $400 for a new steel one plus around $300 for painting it's not that much more expensive. Plus it's weighs about a third as much, is vented, doesn't need spraying and looks cool! :uh-huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...