Jump to content
SAU Community

Recommended Posts

I have no experience with the engine VR38DETT to you that expectation proved largely true! !

Despite the dramatic difference in STROKER! !

But in terms of the experience of the RB20DET and RB25DET and RB26DETT is better in all respects use or promotion or maintenance or endurance is much better too! ! !

There is no engine V6 6 Slander advantage proved successful only relatively Tourqu be a little better and I say this advantage! ! !

But respects mentioned above inline much better health and days will prove myself! ! Despite the size difference stroker !!!!!!!

NOTE: inline engine only for the 6 slander !! V ENGINE GOOD ON THE V8 ONLY !! OR MORE!!!

Dude, you made my head hurt with that :thumbsup: ... stop using google translation to translate from whatever language you first typed that in.

  • Replies 266
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Nope.. clearly remeber it running somwhere in the 10's

close, found this on the web,

- The Z-tune ran 0-400 meters (a little shorter than a quarter mile) in 10.06 seconds during development.

- NISMO claims a Z-Tune will crush through a quarter-mile in just 10.6 seconds on street tires. That would make it the hardest

accelerating "production" car ever.

whoa bkc :whistling: .... thought id start posting and here would be a good place to start. i am with 90% of the others on here. rb26 is a good motor but its like 20yrs old now. iron block too. not too mention the lack of varible valve. sure modders hate it but it is actully a good thing if u can figure it out...and we all no of the rb26s oil problem. now the vr38 is a brand new motor, all alloy, titianum, alloy and magnesium parts = way superior.

and everyone is up in arms bout the manifold and the turbos being 1 peice, harden up girlscouts. everyone replced mainfolds anyway. the gtr's bay is probly wide enough that turbo replacing can be done from underneath rather then removing the motor 300zx style....not to mention tht intake manifold, pure sex

and the argument of sound? well the rb does sound nice, but the sound a well piped v6 can make is enough to make ur pants tighter.

finally, its a supercar, stop hating and start admiring, can you and will you ever be able to afford one? if so buy it and then tell us how bad it is and then give it to me coz i wont complain

/rant

whoa bkc :D .... thought id start posting and here would be a good place to start. i am with 90% of the others on here. rb26 is a good motor but its like 20yrs old now. iron block too. not too mention the lack of varible valve. sure modders hate it but it is actully a good thing if u can figure it out...and we all no of the rb26s oil problem. now the vr38 is a brand new motor, all alloy, titianum, alloy and magnesium parts = way superior.

and everyone is up in arms bout the manifold and the turbos being 1 peice, harden up girlscouts. everyone replced mainfolds anyway. the gtr's bay is probly wide enough that turbo replacing can be done from underneath rather then removing the motor 300zx style....not to mention tht intake manifold, pure sex

and the argument of sound? well the rb does sound nice, but the sound a well piped v6 can make is enough to make ur pants tighter.

finally, its a supercar, stop hating and start admiring, can you and will you ever be able to afford one? if so buy it and then tell us how bad it is and then give it to me coz i wont complain

/rant

Well said

whoa bkc >_< .... thought id start posting and here would be a good place to start. i am with 90% of the others on here. rb26 is a good motor but its like 20yrs old now. iron block too. not too mention the lack of varible valve. sure modders hate it but it is actully a good thing if u can figure it out...and we all no of the rb26s oil problem. now the vr38 is a brand new motor, all alloy, titianum, alloy and magnesium parts = way superior.

and everyone is up in arms bout the manifold and the turbos being 1 peice, harden up girlscouts. everyone replced mainfolds anyway. the gtr's bay is probly wide enough that turbo replacing can be done from underneath rather then removing the motor 300zx style....not to mention tht intake manifold, pure sex

and the argument of sound? well the rb does sound nice, but the sound a well piped v6 can make is enough to make ur pants tighter.

finally, its a supercar, stop hating and start admiring, can you and will you ever be able to afford one? if so buy it and then tell us how bad it is and then give it to me coz i wont complain

/rant

Thank you for your reply .

General information is correct FOR RB26DETT !

EXAMPLE : GTR34 Z TUNE !! BETTER THAN NEW GTR35 ENGINE !! 2.8DETT !! I

THINK SAME TWIN TURBO iHi !! I am not sure from the twin turbo same it or not !!

!(((the less time best)))! :yes: (( 0-100km)) etc . !!!!

Thanks ALL .

Edited by bkc
Thank you for your reply .

General information is correct FOR RB26DETT !

EXAMPLE : GTR34 Z TUNE !! BETTER THAN NEW GTR35 ENGINE !! 2.8DETT !! I

THINK SAME TWIN TURBO iHi !! I am not sure from the twin turbo same it or not !!

!(((the less time best)))! :P (( 0-100km)) etc . !!!!

Thanks ALL .

Your a fking idiout, someone ban this guy or atleast close the thread.

You should have to have some understanding of the english language before posting

just out of curiousity, would what a z-tune cost? now compare that to the new gtr. also take into consideration that if the z-tune is running a race engine then it isn't going to take that kindly to sitting in traffic and driving down to the shops on a cold morning to get some milk. the vr38 is a high performance engine that can be used in everyday situations. also they r35 probably rides better on rough roads than the z-tune. and finally, as far as life of the engine goes, i'd say that the z-tunes motor would wear out quicker than the vr38. yes it has race internals, but they generally aren't designed to still be putting out full power after 100,000kms.

and i thought the vr38 had been developed with the help of cosworth.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...