Jump to content
SAU Community

Recommended Posts

Item:RB30DET From My R32 GTSt

Age:Less than 5000km

Condition:Excellent

Price:18000

To Fit: Skylines R32 - R34 GTSt / GTt (What car)

Location:Sydney

Contact:Babak 0424 159 779 email: [email protected]

Ok guys its time for a change for me. the Running gear is as follow:

This is a combo of RB30ET (Series II) Block and R32 GTR RB26DET head.

Block:

* Series II RB30ET block includes:

* All Block Preps.

* PAR Competion rods

* Arias Pistons

* Nitrided, Heat treated, shotpined, balanced Cranckshaft.

* RB26 Head Includes:

* Ported and polished

* JUN 272` and 10.8mm lift Camshafts Exh. & In.

* JUN type 2 Titaniun retainers

* JUN Heavy duty valve springs.

* Fedenza Cam pullies.

* Custom V&E Rigoli Racing High mount Exhaust Manifold

* Turbo & wastegate:

* Turbo is a custome Precision Turbo chargers T04Z with 1.15A/R Exhaust housing and rated at 900HP.

* Tial 38mm External wastegate with 11 PSI spring

* Drive train:

* In this deal you shall get a Series II RB25DET gearbox with a OS Gikken Twin plate Clutch and Tailshaft.

* Other Items:

* E-Boost2

* Exhaust system

* EMS 8860 with sequential Timing

* PWR FMIC

* Bosch 044 Fuel pump

* SARD 800cc Injectors

* FORD throtle body

* 2 x EMS Ignigter Modules

* Custom Oil catch can

* Custom Cross member adaptors for R32 GTSt Conversion.

The car has made 368.8 RWKW at 15.5 PSI and had run a 11.2 quarter with 1.58 60ft at 122mph. (Before the headwork and runing only 12.8 PSI)

Ok people, this is what you get for my asking amount. People who are in the marken they know how much Time, Money and effort will they need to build this type of engine. So PLEASE NO stupid offers or comments and PLEASE Only Genuine buyers for this deal so they can appreciate what they get.

All the work had been done By Vince and the boys at V&E Rigoli Racing and they can vouch for these items. Some of you might know the car.

If any of you is interested in the whole car you are more than welcome to contact me on my mobile for and inspection and a deal.

Also to inspect the engine running in the car Please contact me for an appointment.

Kind Regards

Babak

post-2102-1194939201_thumb.jpg

post-2102-1194939249_thumb.jpg

post-2102-1194939314_thumb.jpg

post-2102-1194939349_thumb.jpg

post-2102-1194939380_thumb.jpg

post-2102-1194939408_thumb.jpg

post-2102-1194939456_thumb.jpg

post-2102-1194939519_thumb.jpg

post-2102-1194939550_thumb.jpg

post-2102-1194939593_thumb.jpg

post-2102-1194940027_thumb.jpg

post-2102-1194940040_thumb.jpg

post-2102-1194940070_thumb.jpg

post-2102-1194940103_thumb.jpg

post-2102-1194940160_thumb.jpg

post-2102-1194940263_thumb.jpg

Can vouch for this being a good engine/build cause i had seen it many time at v&e but wasnt it finished over a year ago?

Cheers

Peter

PM me if your keen on selling the turbo setup, gearbox and tailshaft seperate.

Thanks,

Daniel

Edited by =premo=

INFNT --- Thanks for the vouch. although i dont know you but thanks again.

Premo --- Sory pal, not interested in seperating parts. it give the point of "Package" deal away.

cheers guys

If you change your mind, especaily on the turbo kit. let me know

(almost finished building an RB30/26det which is very close to being the same as yours)

Thanks,

Daniel

you should have sold this about half a year ago before i started buying all the bits for mine but unfotunatly ive got all my bits ready to go together soon, just wanted to say its worth the asking price for sure.

man chuck allthis gear into a vl... with a good enuf gearbox (powerglide or if u want 3spd jatco with transbrake, fully manualised) and ull have a 9second car pretty much lol. a complete motor with some really nice bits for a decent price guys.

s13 skyline. i know that.. but back then it was still under construction lol. anyways thanks for that and good luck with your one. ;)

qnki- thanks for that pal. that was the whole purpose of this biult. as is will run a mid to high 10s. but once again thanks for the bump.

Babak

Guys if you think its too much of a hassel for you to do the labour part of this deal you can come up with a resonable offer for the whole car.

Hello H. and everyone... as i have mentioned in above replies im NOT going to seperate any parts as it give the purpose of the package deal away. i might consider a swap for a car of my choise and balnced my way if you guys think its a hasell to go through the swapping motors and its bits and peices.

Thanks

Babak :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...