Jump to content
SAU Community

Evo X Launch Last Night

Leewah

By Leewah,
in Victoria

 Share

Recommended Posts

Leewah Veteran

Leewah

Posted
Posted

Last night I had the pleasure of being at the launch of the new Evo X at Rod Laver Arena.

It only had about 80 odd people in there and there wasn't a massive fanfare for it but the event still provided food and drink :worship:

After looking over the new EvoX, I think it's going to be a very good car. It comes in either manual or the Mistu DSG equivalant and the higher speced models like the MR will have leather, a monitor in the dash, Bilstein suspension and some other cool bits.

Estimated cost is around the low 60s which makes it a pretty cool car as a daily and weekender. Available from March/April 08

Evo X launch pics

Link to comment
https://www.sau.com.au/forums/topic/193914-evo-x-launch-last-night/
Share on other sites
Jetdat Veteran

Jetdat

Posted
Posted
Yep I'd agree that the looks are spot on.....what I'd worry about is the rumours I'm hearing that it has gained a fair bit of weight and yet engine output hasn't been 'adjusted' to compensate.

yeah heard the same thing...its apparently slower than previous model.

Leewah Veteran

Leewah

Posted
  • Author
Posted

I think the interior is much nicer than the current version though. It's got more comfy bits inside which makes it a more comfortable daily driver which you can have fun in. I found the IX to be a bit spartan inside and dare say that the interior of the 07 WRX was much nice than the IX.

The X however overcomes this and puts in some cool toys and comfy features to make a nice compromise.

In the end though, it's still an affordable pocket rocket for OS students coming over for a couple years :worship:

Ant97GTR Grand Master

Ant97GTR

Posted
Posted

I'm not against the car growing up a bit and having a few more toys etc but considering the motor is a carry over from previous models it wouldn't take too much to up the power and torque to compensate.....just look at the warrany given on the FQ's in the UK :worship:

Kozeyekan Proficient

Kozeyekan

Posted
Posted

low 60's?

damn, why would anyone buy a new falcodore? even the FPV and HSV models are not as good as the Evo X, and they cost more!

.....sigh why did it have to be priced so affordably? Now I'll just HAVE to get one at some stage.

inark Grand Master

inark

Posted
Posted
I'm not against the car growing up a bit and having a few more toys etc but considering the motor is a carry over from previous models it wouldn't take too much to up the power and torque to compensate.....just look at the warrany given on the FQ's in the UK :rofl:

i thought the engine was reworked... its obviously not 100% brand new type of engine but doesnt it have new turbos and a few other differences?

who realy cares about stock power anyway... thats why mods were invented. Exhaust and chip would be enough to make you forget all about its extra weight

ferni Grand Master

ferni

Posted
Posted

I got offered an invite for this but didn't want to go by myself.

Not a huge fan of those BBS wheels. The Interior doesn't look that much different to the IX than me, but having said that I liked the IX interior.

saff_cossie Grand Master

saff_cossie

Posted
Posted

Is a very good looking car and I would gladly have one. Good to see they have kept the price consistent with the approximate release of the IX, unlike with the VIII that left a lot of VIII owners out of pocket.

This has grown on me :(

sillylankan Rising Star

sillylankan

Posted
Posted
Is a very good looking car and I would gladly have one. Good to see they have kept the price consistent with the approximate release of the IX, unlike with the VIII that left a lot of VIII owners out of pocket.

This has grown on me :(

would you sell yours and buy one?

saff_cossie Grand Master

saff_cossie

Posted
Posted
would you sell yours and buy one?

If things were different financially, possibly. I don't like buying new cars so would be more interested 6-12 months after release date so who knows, things could have changed by then. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...