Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

i have used mark for a long time now and they are the only ones that touch my car he is also a very good friend of mine there is always good cars there but even if there isnt that doesnt mean that the work isnt good yes he does all the work on christians car but mostly thats after hours and sometime he is closed for races but not often he's in america right now but the shop is open martin is tuning and a guy named ben does all the other work

Yeh i heard over the last few days that they have been tuning on an uncalibrated dyno, i alos heard about unsatisfied staff. Just wanted to know if its hearsay or fact.

I suppose its all irrelevant if boostworx are cheaper and do better work.

Yeh i heard over the last few days that they have been tuning on an uncalibrated dyno, i alos heard about unsatisfied staff. Just wanted to know if its hearsay or fact.

I suppose its all irrelevant if boostworx are cheaper and do better work.

Well thier decent engine builder left there to go to JMS, and now he's on the move again i think to Wheelworx!!

All i know is it seems you need to know them or know someone that knows them!!

BOOSTWORX FTW!!

word around says that tillbrooks has a bad rep for blowing cars up on the dyno. i was going to take mine there last time for a tune and i had at least half a dozen people tell me not to.

whats peoples thoughts on morpowa?

ive heard good things about tilbrooks and morpowa, but havnt heard any bad about morpowa yet i dont think, but yeh heard a few things about tillbrooks but u can never be sure whats just bs. depends where u live really, if u live north of the city morpowa is probably easier for u, if u live south of the city boostworx is probably the go.

My car is tuned by Morpowa. Simon seems good, I've got a problem with a knock sensor at the moment and he didn't hesitate to run it up on the dyno and then on the street to check it out FREE OF CHARGE. He said that i had paid for a tune and it's gotta be right. Turns out the tune was right but the knock sensor was/is faulty.

I'm happy :P

Morpowa are good & they have more workers so will generally get things done quicker (although not always for the better) but, comes at a higher $$rate. Since swapping over 16mths ago & converting several mates to BoostWorx we've found Shaun a lot more proficient with the tuning side of things (ECU's, EBC & other electronics) than Simon/ Andrew. Only prob with BW is they should be up more North way considering Troy & Shaun live up this way :).

I can recommend morpowa also. Boostworx are my first choice for tuning especially and I'll hopefully be booking my car in there soon for a 100,000km service.

However, being out north I have been to morpowa several times, mainly just for regular servicing - since they have an auto trans specialist right next door and you can book into morpowa for a service and get the auto trans serviced at the same time and morpowa handle the whole lot so its just one transaction and your car is off the road for just one day. Their prices are quite good and I've been happy with their work.

i have just my car done by tilbrooks and they did an awesome job on the car....its gone a lot smoother then before....so my experience with tilbrooks has been a good one and mark the owner does look after you well....

as for morpowa my mate used to get his car serviced there and his car was just a pain to drive.....and they never figured the problem out so he took it to tilbrooks and they sorted it all out for him and now that thing boots.....

boostworx never been there as it is way down south and bit too fair for me.....but i have heard of a lot of good things about them and will get my ecu tuned down there as they are apparently the best in tunning...

AAA+++ for Boostworx Great Blokes & Awesome Tunning,

First time i ever got my car tunned i booked in it at TillBrooks, when i turned up the guy i wont mention any names wasnt even there and they didnt know anything about the tune, plus they said it was going to cost me $600 for a tune & i would have to wait till the afternoon and it was 8am???

So i went straight off to Boostworx and was really impressed with there service :(, great price 1/4 of that and car went great!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...