Jump to content
SAU Community

Recommended Posts

after initally wanting the stock spoiler when i was looking for my V35, i deceded quickly that i didn't like it at all. so i went for the no spoiler look.

a while back i finally decided i wanted a rear lip spoiler, and after searching on g35driver.com i found the one i was after

its from Unlimited Tuning, their G2 lip spoiler.. ordered in from the USA

well after recieving it a week back i finally had it painted and fitted today..

my first impression when i picked the car up was the mounting position. from the pictures i saw from g35driver, it is supposed to be mounted about an inch rearward than it is. i asked the painter and he said that this position is where it fit best over the bootlid and any further back and the front of the spoiler lifts up a little.. the colour is a great match and the finish of the painting is awesome upclose

to be honest i'm happy that the spoiler looks as i wanted it, but i'm a bit dissapointed with the mounting position

and to make things worst they used some kind of glue to mount it, the same thing they use to mount windscreens in place, so its not as easy as peeling it off and re-mounting it. i'm not sure of if or how they can remove it

i'm going to take it back tomorrow to get them to move it rearward however they can, i'm really quite dissapointed

well thought i would vent a bit and get some opinions while i'm at it and see if anyone has experience with this glue they talk of

cheers,

Warren

post-2094-1195633386_thumb.jpg

post-2094-1195633474_thumb.jpg

post-2094-1195633486_thumb.jpg

post-2094-1195634049_thumb.jpg

Edited by WazR32GTSt
Link to comment
https://www.sau.com.au/forums/topic/194692-m3-style-lip-spoiler-installed/
Share on other sites

here are some pics from others that have installed it.. you can see what i mean by them mounting it more forward..

the red car is the one from their official unlimitedtuning website..

does anyone think that it looks ok where it is now, or am i right in feeling a bit dissappointed?

post-2094-1195633923_thumb.jpg

post-2094-1195633944_thumb.jpg

post-2094-1195633959_thumb.jpg

here are some pics from others that have installed it.. you can see what i mean by them mounting it more forward..

the red car is the one from their official unlimitedtuning website..

does anyone think that it looks ok where it is now, or am i right in feeling a bit dissappointed?

Sorry to say- they stuffed it BIG TIME. Does not flow at all.

i have a serious exam tomorrow for uni and i'm furious about the stupid spoiler.. hope i can get it out of my head before the morning

i'm going there straight after my exam and getting them to re-do it. if the urethane doesnt come off without scratching the paint i'm going to get them to re-paint the whole boot and they can pay for it

man its just been eating at me all night since i got home..

another pic of how its supposed to look is below. if you compare it to mine you can see how its supposed to flow and how mine is way off..

its partially my fault. they said they can't mount it flush with the rear as it doesn't sit right, and i said fine. i didn't think they would mount it half way up the boot though..

post-2094-1195640434_thumb.jpg

i have a serious exam tomorrow for uni and i'm furious about the stupid spoiler.. hope i can get it out of my head before the morning

i'm going there straight after my exam and getting them to re-do it. if the urethane doesnt come off without scratching the paint i'm going to get them to re-paint the whole boot and they can pay for it

man its just been eating at me all night since i got home..

another pic of how its supposed to look is below. if you compare it to mine you can see how its supposed to flow and how mine is way off..

its partially my fault. they said they can't mount it flush with the rear as it doesn't sit right, and i said fine. i didn't think they would mount it half way up the boot though..

Hey Waz,

great idea, love those. But the definitely fu9ked it.

Worry about the exam first, car second. It's a spoiler, and even if they have to scrape it off the boot lid is re-sprayable.

Cheers

Bobby

i have a serious exam tomorrow for uni and i'm furious about the stupid spoiler.. hope i can get it out of my head before the morning

i'm going there straight after my exam and getting them to re-do it. if the urethane doesnt come off without scratching the paint i'm going to get them to re-paint the whole boot and they can pay for it

man its just been eating at me all night since i got home..

another pic of how its supposed to look is below. if you compare it to mine you can see how its supposed to flow and how mine is way off..

its partially my fault. they said they can't mount it flush with the rear as it doesn't sit right, and i said fine. i didn't think they would mount it half way up the boot though..

bring it back and show them a picture of how it should be mounted.

good luck.

Hopefully the urethane hasnt set too hard.

Otherwise they will need to get a caramel wheel to get the remaining glue off.

Rather than run a bead along the whole way of the wing- 4 blobs should be enough.

apparently it sets in 4hrs to a good strength and fully sets in 14days

i'm going to take it in tomorrow so its as early as possible to make it as easy to get off as possible..

expensive lesson learnt for me - i think i'll leave the car as stock as i can for now..

just to update everyone..

went good on my exam :rofl: had a patient with a "borderline personality disorder" that i had to interview andmake a management plan.. not the easiest thing in the world

went good with the boot --> spoiler removed, no damage to boot or spoiler!

spoiler now for sale, and potentially already sold to Unique!

  • 4 weeks later...

I now have the same car as yours without rev cam but I am going with the clean no spoiler look.

Freakin love the car. Best ever.

G

just to update everyone..

went good on my exam :) had a patient with a "borderline personality disorder" that i had to interview andmake a management plan.. not the easiest thing in the world

went good with the boot --> spoiler removed, no damage to boot or spoiler!

spoiler now for sale, and potentially already sold to Unique!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...