Jump to content
SAU Community

Recommended Posts

There's plenty of components that could be helping out there.

It does sound suspension related if it is ok unless going over bumps.

Might be time to change the bushes or something like that.

Pretty cheap if you just install pineapples to make it tight again.

Check for wet or oily patches in the general area around the subframe.

If it isn't suspension related, perhaps something simple like a tailshaft bracket has come loose.

Or it could be something dodgy like your exhaust is hanging loose.

Either of these rocking at high-speed would amplify the effect of the wobble.

Depends what you are feeling. Wouldn't hurt to take a quick look to rule these out.

You should be able to give it a decent overview yourself - from gearbox back.

Try and shake everything by hand and if anything moves, that'd be the first place to start.

Once the initial check is done, best to get it onto a hoist and give it a proper look, especially if it is influencing hi-speed control like that.

Should be easy to rule out wheel bearings if you aren't hearing the low hum noise at high speeds.

If you drift, then who knows.

Might just have to take the trusted mechanic for a spin and see what they think.

Oh - Does it feel like your suspension is bottom-ing out ? Perhaps just need a new set of springs, or if there is oil running down your shocks, perhaps time to get a new set of those.

Hope this helps.

Don't mean to hijack or anything - related really - but what the hell are pineapples and what exactly do they do?

I have heard about them, seen pics of them but just lost on where they go in the susp. and their function...

Seriously just take it into one of those pedders suspension checks... Cheap and your not obligated to have any work done afterwards.

Probably the quickest way to find out what the issue is because as above it could be numerous things.

Thanks PappaDuck for all your help.

I can rule out anything being loose now.

The car has got pineapples.

When I think about it more I think it is suspension related.

The front end has to tendency to bottom out going over bumps and makes a loud bang noise.

If i remember corrrectly it all seemed to change after one drifting eposide. Mates have told me the rear tyres look wobbly and it kinds feels likr that a bit aswell.

I'll put it on a hoist and see if i can find something wrong with suspension.

mine is doing the same thing. are you hearing a sound like something is hitting something else. like metal to metal, my left rear strut is blown and as soon as it went out mine started hopping left. its scary feeling. check and see if your struts are good. im replacing mine and ill let you know if it fixes it. also yeah what are pineapples

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...