Jump to content
SAU Community

Recommended Posts

had same problem with slide performance stage 3 hiflow

swapped for hks gtrs and holds boost perfectly at 1.4 bar

everything else was identical , exhaust , intake etc

i personally suspect turbine housing but I am no expert

Have you got any dyno charts?

Well guys, i tried that intake pipe mod, but as i was connecting the airfilter+afm back, i realised it was bending abit much so im sure the airflow is restricting. im gonna get back into it, and cut off abit more of the steel pipe i put between the intake pipe, hopefully sometime during this week, or the weekend. there was still some boost drop (reading off the boost gauge). my mate decided that we'd replace the blitz bov while we were still in the engine bay, so we put in the stockie, and piped it back plumback style, and for the first time it seems, boost is holding at about 1.1 bar or just over 16psi! This is my mate observing the boost gauge.. So first ill fix up the intake pipe, and then ill throw it on the dyno, and see if were progressing or not. Ill keep you guys posted.

Well guys, i tried that intake pipe mod, but as i was connecting the airfilter+afm back, i realised it was bending abit much so im sure the airflow is restricting. im gonna get back into it, and cut off abit more of the steel pipe i put between the intake pipe, hopefully sometime during this week, or the weekend. there was still some boost drop (reading off the boost gauge). my mate decided that we'd replace the blitz bov while we were still in the engine bay, so we put in the stockie, and piped it back plumback style, and for the first time it seems, boost is holding at about 1.1 bar or just over 16psi! This is my mate observing the boost gauge.. So first ill fix up the intake pipe, and then ill throw it on the dyno, and see if were progressing or not. Ill keep you guys posted.

Watching intently :P

Looks like ive solved the problem boys!! i swapped over the 13cm steel pipe i had in my intake pipe, with a 10cm one, and it sat perfectly, though slightly smaller than standard. so after eliminating the bend i had with the 13cm pipe, my car is boosting way better. im hitting 1.5bar(22psi) which is then backing off to 1.2bar(17.64psi). seems like its spiking... it'll be goin on the dyno hopefully on the weekend.

will keep you posted...

zero traction in 1st and 2nd :nyaanyaa:

nice....

looks like i spoke too soon.... car went on the dyno this afternoon, and its still dropping boost. in fact according to the dynograph, there isnt any change from before at all! ive ruled my blitz boost gauge as faulty... a few people reckon it might be the boost controller, so with the less expensive options knocked out of the way, my next move is to go electronic on the boost controller.. spin out!! :P

btw, a friend was saying that by upping the gain through an electronic boost controller, youre causing stress on the turbo.. any insight on the matter???

looks like i spoke too soon.... car went on the dyno this afternoon, and its still dropping boost. in fact according to the dynograph, there isnt any change from before at all! ive ruled my blitz boost gauge as faulty... a few people reckon it might be the boost controller, so with the less expensive options knocked out of the way, my next move is to go electronic on the boost controller.. spin out!! :P

btw, a friend was saying that by upping the gain through an electronic boost controller, youre causing stress on the turbo.. any insight on the matter???

Yep clone situation of what happened to my car, the dyno never lies :P The boost controller won't fix it either, trust me I've been down this path and spent enough money on the folly. It always comes back to the same conclusion....GT-RS is the way to go.

  • 2 weeks later...

For all those interested, i finally got my AVCR installed 2day. produced 261.1rwkw on a dyno dynamics. held 18psi throughout. ill be leaning it out abit in a few weeks, as it is a tad bit too rich for my liking.

BUT, the boost controller fixed the prob.

666DAN: what kind of boost controller u got there bro?

I was using a Profec B-Spec II, I also used and HKS actuator, the stock actuator, an RB20 actuator and a combination of boost controller and all the actuators. I also ran with *NO* actuator and still got a ceiling of around 16psi and boost drop-off.

hmm profec b, the boys at Unique autosports patched in one of those in the midst of my boost problems... even though it held the boost better, there was still significant boost drop. the avcr on the other hand worked the treat. you can increase the duty according to rpm, and throughout each gear. also has a self-learn process, so itll adjust better as you drive. might wanna try out the avcr. my 2c..

hmm profec b, the boys at Unique autosports patched in one of those in the midst of my boost problems... even though it held the boost better, there was still significant boost drop. the avcr on the other hand worked the treat. you can increase the duty according to rpm, and throughout each gear. also has a self-learn process, so itll adjust better as you drive. might wanna try out the avcr. my 2c..

Yep just bought one, worth it just to see if I can get some sort of improvement before I shell out on something more expensive (GTRS) I like the fact is has graphing and 60sec recall....I'm a whore for features like that :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...