Jump to content
SAU Community

Recommended Posts

How bout you have a look before talking!!!

All cheap turbos are a ticking time bomb waiting to explode, if you don;t push them too hard you will be ok for 15000k's but if you push them your asking for trouble

haha ^ not nice, ive played with a fair few of these turbos now and i really dont rate them but i must admit they are worth nearly nothing new so if your happy with mediaocre peformance than you really cant knock em or complain..... they feel very flat to drive compared to the kind of turbos i would generally use... i remmber driving and passengering in the ex-HPI black R34 with one of the KKR turbo's on it and being totally dissapointed but the new owner was stoked....

at the end of the day if you dont know what your missing...... they are killer :rofl:

Hey Mate.

Im doing a build on my 20 going to try for 300rwkw in it going to use the same cams 256/8.5 but gonig with over size pistons so will be looking at a RB21 with a hypergear tr43hf with 023 fuel pump 555cc nismos but not sure on ecu looking at the emanage or going a gtr pfc

legend01 is selling his RB21 and he has already made that power level if you want a proven result.

Ontopic:

A friend of mine has a sr20det with HKS GTRS. Is is going to a bigger turbo and now selling his gtrs. Unfortunately this has a t25 flange. My question is: Can the gtrs turbine housing being swapped for my t3 gt2530 turbine housing? Or does this not fit? I came up this idea because it has exactly the same size:

gt2530r turbine:

Wheel- 76 Trim - 53.8 Major / 47.0 Exducer

GTRS:

Turbine wheel Trim 76Major diameter 53.8 (mm) Exit diameter 47.0(mm)

??

dmac_25 - i can promise you that 300rwkw is nothing but dream with a 440hp turbo.

You'll need something in the region of 500-550hp for 300rwkw, with a VERY well built motor, and as your talking RB20... 25psi +

Cheers.

It sickens me when some of you jerks spilling shit and beg other people's products.

Most of the turbos are built and balanced right here by Garrett dealers, All of them are VSR Simulated here before their distribution. We are not China KKR so don't make comparison.

Here are some drift footage powered by our turbochargers

and you can find out lot more dyno footage on youtube. Also we will be at the drift fest competing next weekend, so come to see if for your self if you are in Melbourne.

Edited by hypergear
It sickens me when some of you jerks spilling shit and beg other people's products.

Most of the turbos are built and balanced right here by Garrett dealers, All of them are VSR Simulated here before their distribution. We are not China KKR so don't make comparison.

Here are some drift footage powered by our turbochargers

and you can find out lot more dyno footage on youtube. Also we will be at the drift fest competing next weekend, so come to see if for your self if you are in Melbourne.

i never said they were unreliable, i just dont like the power delivery and thats what i compared to KKR..... and if you read my post carefully you will see that my point was if you want a cheap turbo cause you cant afford something decent they offer value for money.

  • 2 weeks later...
Ontopic:

A friend of mine has a sr20det with HKS GTRS. Is is going to a bigger turbo and now selling his gtrs. Unfortunately this has a t25 flange. My question is: Can the gtrs turbine housing being swapped for my t3 gt2530 turbine housing? Or does this not fit? I came up this idea because it has exactly the same size:

gt2530r turbine:

Wheel- 76 Trim - 53.8 Major / 47.0 Exducer

GTRS:

Turbine wheel Trim 76Major diameter 53.8 (mm) Exit diameter 47.0(mm)

??

HKS make a GTRS kit to fit a RB20 engine.(meaning it comes with a t3 flange). the only thing i can think of that might need to change is your dump...MAYBE...im not 100% on this. if you bought this turbo with the right flange(T3), OMG, save you stuffing around big time

I know they make this kit wich is bolt on for rb20det with t3 flange.

I now have a t3 flanged gt2530r, my friend has an t2 flanges gt-rs. Both have same turbinewheels. If its possible to swap the turbine housings so the gt-rs will fit my rb20det and we can sell the gt2530 to somebody with a ca18det or sr20det. there is now other dump pipe needed, since this fits to the turbinehousing aswell!

Edited by ivosp

Hey mate, I used to have an RB20 with HKS 2535, and it made 222rwkw. With cams and a decent tune I wouldn't think the 2530 would get you to 240rwkw. but if you can settle for 215-230 I recon you will fall in there somewhere. For the extra $$$ you are going to spend on changing turbo its not worth it. If you make it to 240rwkw then your doing very well and I am not saying its impossible, what the car being used for??? maybe have to upgrade to RB25 box??? especially if you drifting.

  • 3 weeks later...

As promised, 2007 Drift Fest. HyperGear TR43 powered CA18det S13.5 in car footage. The car's running 220KWs wheels on 15PSI with 695Nm of torque. (This power is not much compare to RB25 and RB26s, But it is not bad for a CA18det).

Part 1:

Part2:

Out car footage. (Its the Red S15 / S13 with black bonnet. I also included some nice sliding actions from other drivers)

Part 1:

Part2:

Edited by hypergear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...