Jump to content
SAU Community

Recommended Posts

I am sure this effects you all *this* much :) but yup, went in today to the MacLeod station (near Latrobe uni) and all clear. Went into there at 11am, and 15mins later was out of there. So all up 90mins of driving out there and back for a 15min test.

Exhaust I think was 87db and CO levels way under. Glad I didn't have to change my exhaust for stock, that would have been a pain in the rectum.

He even said how nice my car was and apologised for wasting my time :( - and I told him "well its the cops fault not yours". So all is good.

If anybody wants any pointers or advice, or need the "required items" let me know.

Basically - just ensure you have a stock airbox on, stock boost solenoid, exhaust under 90db (doesn't have to be stock) and stock computer (these are all checked) and you'll pass fine. Big FMIC is fine as its only one intake modification.

:Pimp:

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/
Share on other sites

If you ever get called up, your new beast will probably just be tested as a GTR.. so just tell them it is :( I don't think they'd be expert enough to pick its not. Apparently as the Skylines aren't produced locally they don't have any concrete guidelines.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413664
Share on other sites

HA!

with those turbo's lol!!!

rightyo.

Anyhow. Well done Gordo. Micght need that airbox one day lol!

and zorst... :(

good thing i still got my STOCK ECU... it's just been 'enhanced' somewhat :)

i'll put money on it that it's better than the stock settings anhow.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413726
Share on other sites

theyll pick it up as not being a gtr pred, i dont take them for not being stupid

infact he double checked my car inregards to it being an actual turbo model

the problem with Jet is the RB26 ISNT stock in a GTSt and hence hell get royally screwed

i know someone that had a coroller that dropped in a 4agze, the she got EPA'ed pretty badly because it wasnt the engine the car came out with from factory (in australia)

although they are like that in japan, the problem is the engine WASNT in from factory in australia

screwed

they know their GTRs from their GTSts

im sure they deal with skylines and VL's everyday

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413737
Share on other sites

Yer, well depends - there are a few different testers. He didn't pop my AFM like yours and only checked the ECU with a casual inspection. Depends who you get I suppose. No I agree, they aren't stupid - nice guy. They're not the bad guys, but everybody knows that.

I'm pretty sure you'd get fried for an aftermarket turbo or engine - its kinda obvious. Highflow a stockie though and you'd probably be fine. Doing a full engine or turbo swap for an EPA test wouldn't be fun thats for sure. ... Just remember that guys when doing your mods.

If you are called in by a nasty copper - you'll need a full engineers certificate done and full EPA certification to get it back on the road... $1000's

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413797
Share on other sites

...exactly... Its such a grey area.... there is also nothing to say that Vicroads and the EPA agree on their standards either. Just because the vehicle is road registered doesn't mean that its what the EPA thinks is compliant.

I mean for the less well known vehicles, they have basically no idea what it came standard with, what its standard emission controls are, or anything else. So who knows..but there only has to be somebody, somewhere out there at the top that goes "nope" and then you're screwed.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-414297
Share on other sites

Being registered with a different engine type does not make it legal, in regards to epa and roadworthy.

Half the time you can walk into an RTA and tell the clueless person behind the counter "my original motor blew up and had to replace it with a rb26dett, engine number ##########". They wouldn't have an idea what you are talkin about. But when being inspected, the inspectors generally know their stuff (not talkin about street cops).

But you don't worry about this 5hit until you need to.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-414425
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...