Jump to content
SAU Community

Recommended Posts

I am sure this effects you all *this* much :) but yup, went in today to the MacLeod station (near Latrobe uni) and all clear. Went into there at 11am, and 15mins later was out of there. So all up 90mins of driving out there and back for a 15min test.

Exhaust I think was 87db and CO levels way under. Glad I didn't have to change my exhaust for stock, that would have been a pain in the rectum.

He even said how nice my car was and apologised for wasting my time :( - and I told him "well its the cops fault not yours". So all is good.

If anybody wants any pointers or advice, or need the "required items" let me know.

Basically - just ensure you have a stock airbox on, stock boost solenoid, exhaust under 90db (doesn't have to be stock) and stock computer (these are all checked) and you'll pass fine. Big FMIC is fine as its only one intake modification.

:Pimp:

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/
Share on other sites

If you ever get called up, your new beast will probably just be tested as a GTR.. so just tell them it is :( I don't think they'd be expert enough to pick its not. Apparently as the Skylines aren't produced locally they don't have any concrete guidelines.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413664
Share on other sites

HA!

with those turbo's lol!!!

rightyo.

Anyhow. Well done Gordo. Micght need that airbox one day lol!

and zorst... :(

good thing i still got my STOCK ECU... it's just been 'enhanced' somewhat :)

i'll put money on it that it's better than the stock settings anhow.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413726
Share on other sites

theyll pick it up as not being a gtr pred, i dont take them for not being stupid

infact he double checked my car inregards to it being an actual turbo model

the problem with Jet is the RB26 ISNT stock in a GTSt and hence hell get royally screwed

i know someone that had a coroller that dropped in a 4agze, the she got EPA'ed pretty badly because it wasnt the engine the car came out with from factory (in australia)

although they are like that in japan, the problem is the engine WASNT in from factory in australia

screwed

they know their GTRs from their GTSts

im sure they deal with skylines and VL's everyday

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413737
Share on other sites

Yer, well depends - there are a few different testers. He didn't pop my AFM like yours and only checked the ECU with a casual inspection. Depends who you get I suppose. No I agree, they aren't stupid - nice guy. They're not the bad guys, but everybody knows that.

I'm pretty sure you'd get fried for an aftermarket turbo or engine - its kinda obvious. Highflow a stockie though and you'd probably be fine. Doing a full engine or turbo swap for an EPA test wouldn't be fun thats for sure. ... Just remember that guys when doing your mods.

If you are called in by a nasty copper - you'll need a full engineers certificate done and full EPA certification to get it back on the road... $1000's

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413797
Share on other sites

...exactly... Its such a grey area.... there is also nothing to say that Vicroads and the EPA agree on their standards either. Just because the vehicle is road registered doesn't mean that its what the EPA thinks is compliant.

I mean for the less well known vehicles, they have basically no idea what it came standard with, what its standard emission controls are, or anything else. So who knows..but there only has to be somebody, somewhere out there at the top that goes "nope" and then you're screwed.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-414297
Share on other sites

Being registered with a different engine type does not make it legal, in regards to epa and roadworthy.

Half the time you can walk into an RTA and tell the clueless person behind the counter "my original motor blew up and had to replace it with a rb26dett, engine number ##########". They wouldn't have an idea what you are talkin about. But when being inspected, the inspectors generally know their stuff (not talkin about street cops).

But you don't worry about this 5hit until you need to.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-414425
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...