Jump to content
SAU Community

Passed my EPA :-)

predator

By predator,
in Victoria

 Share

Recommended Posts

predator Grand Master

predator

Posted
Posted

I am sure this effects you all *this* much :) but yup, went in today to the MacLeod station (near Latrobe uni) and all clear. Went into there at 11am, and 15mins later was out of there. So all up 90mins of driving out there and back for a 15min test.

Exhaust I think was 87db and CO levels way under. Glad I didn't have to change my exhaust for stock, that would have been a pain in the rectum.

He even said how nice my car was and apologised for wasting my time :( - and I told him "well its the cops fault not yours". So all is good.

If anybody wants any pointers or advice, or need the "required items" let me know.

Basically - just ensure you have a stock airbox on, stock boost solenoid, exhaust under 90db (doesn't have to be stock) and stock computer (these are all checked) and you'll pass fine. Big FMIC is fine as its only one intake modification.

:Pimp:

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/
Share on other sites
predator Grand Master

predator

Posted
  • Author
Posted

If you ever get called up, your new beast will probably just be tested as a GTR.. so just tell them it is :( I don't think they'd be expert enough to pick its not. Apparently as the Skylines aren't produced locally they don't have any concrete guidelines.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413664
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

HA!

with those turbo's lol!!!

rightyo.

Anyhow. Well done Gordo. Micght need that airbox one day lol!

and zorst... :(

good thing i still got my STOCK ECU... it's just been 'enhanced' somewhat :)

i'll put money on it that it's better than the stock settings anhow.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413726
Share on other sites
whistla Proficient

whistla

Posted
Posted

theyll pick it up as not being a gtr pred, i dont take them for not being stupid

infact he double checked my car inregards to it being an actual turbo model

the problem with Jet is the RB26 ISNT stock in a GTSt and hence hell get royally screwed

i know someone that had a coroller that dropped in a 4agze, the she got EPA'ed pretty badly because it wasnt the engine the car came out with from factory (in australia)

although they are like that in japan, the problem is the engine WASNT in from factory in australia

screwed

they know their GTRs from their GTSts

im sure they deal with skylines and VL's everyday

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413737
Share on other sites
predator Grand Master

predator

Posted
  • Author
Posted

Yer, well depends - there are a few different testers. He didn't pop my AFM like yours and only checked the ECU with a casual inspection. Depends who you get I suppose. No I agree, they aren't stupid - nice guy. They're not the bad guys, but everybody knows that.

I'm pretty sure you'd get fried for an aftermarket turbo or engine - its kinda obvious. Highflow a stockie though and you'd probably be fine. Doing a full engine or turbo swap for an EPA test wouldn't be fun thats for sure. ... Just remember that guys when doing your mods.

If you are called in by a nasty copper - you'll need a full engineers certificate done and full EPA certification to get it back on the road... $1000's

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413797
Share on other sites
predator Grand Master

predator

Posted
  • Author
Posted

...exactly... Its such a grey area.... there is also nothing to say that Vicroads and the EPA agree on their standards either. Just because the vehicle is road registered doesn't mean that its what the EPA thinks is compliant.

I mean for the less well known vehicles, they have basically no idea what it came standard with, what its standard emission controls are, or anything else. So who knows..but there only has to be somebody, somewhere out there at the top that goes "nope" and then you're screwed.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-414297
Share on other sites
Al Grand Master

Al

Posted
Posted

Being registered with a different engine type does not make it legal, in regards to epa and roadworthy.

Half the time you can walk into an RTA and tell the clueless person behind the counter "my original motor blew up and had to replace it with a rb26dett, engine number ##########". They wouldn't have an idea what you are talkin about. But when being inspected, the inspectors generally know their stuff (not talkin about street cops).

But you don't worry about this 5hit until you need to.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-414425
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      Continental have consistently beaten the absolute shit out of every other performance tyre in Wet/Damp/Cold conditions and give up a little bit of time (half a second at most) in the dry. Almost like it's engineered for German conditions or something. I'd def give those a try.
×
×
  • Create New...