Jump to content
SAU Community

Desperate! In Need Of Engineers Cert.


Recommended Posts

Hi guys and girls. Well to cut a long story short im another one on the list to be pulled over in my skyline (r33 gts-t), bent over and f*ked! On sat night i was at knox minding my own business gettin cash out of the atm and sum drinks with a mate and a unmarked VE cop car pulled me over right in front of the police station on burwood highway. It was the one and only officer petit (however u spell it, cant read it on the notice).

Neways, i got defected for cooler pipes runnign through a hole in the body, epa'd for pod and a list of fines such as high powered vehicle on p plates and my rear p plate had fallen off, so they got me for that to.

Im now in desperate need of a engineer to pass my car to get this defect off. Ive spoken to a fair few from the VASS list on vic roads website and they hav either said they dont do cars or they wont pass it after i showed them some pics.

Can sum1 please tell me who they used to get a engineers cert in victoria. Im desperate!

resized.jpg

Edited by tom_v
Link to comment
https://www.sau.com.au/forums/topic/197214-desperate-in-need-of-engineers-cert/
Share on other sites

did you cop 3 demerit points?

change the things on your car which are defected, go to any mechanic with a RWC license.. and get it passed.. easy..

with epa, you will haveto return ur car to complete stock

The only people that can give you a VASS are the people listed on the VicRoads website.

So if they say they wont touch it as is, thats how it is... and looking at those pics, i can see why as i've had engineers explain it to me in long discussions :D

No Engineer will ever sign off a chop job like that mate.

Anything that goes through there is not passable due to untested effects on air bags.

Time to get it properly welded up and the cooler properly installed.

i think any qualified engineer wont risk their licesnse to pass something that is obviously illegal. it aint cheap either i think. technically your car is deemed illegal hence the reason why the ones you have spoken to have knocked you back. your gonna have to pass the emmisions test which by the sounds of your mods you might not?

id say you'd have to make your car legal again to clear the defect. dunno about hipower for P's though. maybe someone else with experience can answer that one.

ive got a low exhaust pipe that i might have to re-weld to clear my defect. gotta do what you gotta i guess.

Look mate, here's my honest opinion - just spend the cash and get everything done right then get a legit RWC - this is what I have done... I've taken my BOV off, put my stock airbox on etc and now everything is good - for some sound etc, I really can't be bothered about getting defect notices... go stock as this is the safest and long-term fix... not worth it mate...

Good luck - I know it sucks... but get it fixed now...

As above

I doubt you'll get one anywhere, modern cars are a monocoque design...meaning every part of the shell contributes to it's structural integrity, with built in crumple zones to lessen the effects of any impact on it's passengers. Unlike older cars which had a full chassis.

Sounds over the top but that's how an engineer would view your modification to the inner guard.

The advise to return it to stock is sound advise, even better would be to get a car that's within the guidelines of your licensing restriction.

You might not have even got pulled in a 32.

ive got one for you....what if i owned that car,got pulled over and got done such as yourself.But instead i decided to unpick the skirt that sits between the rad support and the coil support and buy a new one from nissan and respot it in??If you have a major front ender and bend chassis rails and a panel shop gets paid from an insurance company to change the rails they dont make you get one of those reports......i would be argueing that

Edited by ylwgtr2

Petit got my mate for the FMIC pipping in his S15 the same way.

He got quoted quite alot to get it fixed and to get the engineers cert. To be honest mate, if you live in the area, petit is on any import cars ass, and he researches his stuff so he knows whats dodgey. I grew up in that area, and youll be lucky to get away with anything even slightly borderline. Sell the car and get a R32 GTST. Or return it to stock. Even then you will still have power to weight issues and the fines can go up to $1k now from memory, so not worth it.

PS: Ive actually had Petit come out to my house when there was a BBQ because there was too much noise. Several modified imports sitting out the front. But everyone was drunk and noone was driving so he didnt even bother. Lucky for us.

he can be an absolute ass from what i have heard, but he is just doing his job to the letter of the law mate. If your gonna be risking the safety of your car by doing bodgy jobs you gotta expect stuff like that to happen. Just get it fixed up and away you go :devil:

Not too sure about the too powerful. Do the r33's fall under the p/w ratio?

he can be an absolute ass from what i have heard, but he is just doing his job to the letter of the law mate. If your gonna be risking the safety of your car by doing bodgy jobs you gotta expect stuff like that to happen. Just get it fixed up and away you go :devil:

Not too sure about the too powerful. Do the r33's fall under the p/w ratio?

R33's do. A standard R33 GTST is over power/weight for P Platers. You can get either an NA R32/33/34 or a R32 GTST.

so basically you have no chance bud, you license will be gone quicker than you can imagine if its 3 points and a $1,000 fine. Just think is it really worth paying $2000 in fines + the cash to fix your car up to standard plus losing your license?

Maybe sell up for an N/A or a 32 gts-t?

Next time our good mate petit see's you (if he remembers your car) expect to be pulled over and raped again!

p.s if your car IS over the p/w ratio you should have lost your licese anyway shouldnt ya?

no p plates = 3 points and over p/w = 3 points?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all just wanting some advice. I’ve just compression tested my RB25det and these are the following results  Cyl 1 - 135psi Cyl 2 - 135psi Cyl 3 - 120psi Cyl 4 - 140psi Cyl 5 - 130psi Cyl 6 - 125psi   do these numbers seem ok.  Thanks in advance 
    • I must say - this is how I picture all R31s!
    • Rust repairs completed, doors back on! pretty much totally back together running now. All future repairs will be fiddly wiring getting everything back up to road condition.  hasn’t  taken that long considering the condition I got the sub. note my helpers keeping the back seat warm 😂
    • SAU NSW Old Pac Cruise to Newcastle All Japan Day 2025 Sunday 27th July 2025 5:00AM Meeting Berowra Station Commuter Car Park 2 5:15AM Departure Cruise Via Old Pacific Hwy 7:45AM Arrival to Lambton Pool (Regroup) 8:00AM Arrival to Newcastle All Japan Day 2025 Meet Location: Berowra Station Commuter Car Park 2 Stop 1: Lambton Pool (Carpark) Final Destination: McDonald Jones Stadium for Newcastle All Japan Day 2025 Tickets: Newcastle All Japan Day 2025 $20 Per Car Spectators Free PURCHASE TICKETS HERE *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • SAU NSW Attends Machines & Macchiatos Cars and Coffee Sunday 13th July 2025 7:00AM Meeting Davidson Park 7:20AM Departure 7:45AM Arrival at Northern Beaches Christian School Meet Location: Davidson Park Final Destination: Northern Beaches Christian School Machines & Macchiatos Tickets: $10 Per Car $2 Spectators Pay at Gate LIMITED SPACES Register Below to Reserve your Spot. Members Receive Preference REGISTER HERE   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...