Jump to content
SAU Community

Need Help With Unstoppable Hot Air In Car

matt31

By matt31,
in General Maintenance

 Share

Recommended Posts

matt31 Rising Star

matt31

Posted
Posted

Hi guys, my car has no receiver dryer and no ac fan, and constantly pumps unstoppable hot air through the vents. I'm really not mechanically minded so could someone explain to me wtf is going on and how i can get it fixed cause i have no idea where to start.

vinnie32GTS4 Mentor

vinnie32GTS4

Posted
Posted

have u checked that the switch for where the air comes from is not set onto outside air..U know the switch where u can change it from outside air to recirculating air already inside the cabin..

if u have it to outside air no matter if the a/c is off air will still come thru

matt31 Rising Star

matt31

Posted
  • Author
Posted
vinnie is right, turn it on, and press recirculate so that the green (?) light comes on. let it change over to recirculate and turn it off. then never touch it again lol

yeah tried that, does nothing.

Godzilla32 Veteran

Godzilla32

Posted
Posted

If the interior air sensor is disconnected you will only get hot air so my guess is that it will be either faulty or disconnected. If you find its connected try running the climate control diagnostic to see if its faulty. Common thing to find with your symptoms. The sensor is located on the center console facia behind where there is a small vent in it. Pull it off and you will see what i mean. If you need pics, i can arrange them.

Deren

mark_sudakov Community Regular

mark_sudakov

Posted
Posted

i have same problem but i have aircon. I cant get it to recirculating. Would it be either the switch or the motor that powers the flap? If so, how hard is it to get to the motor?

Thanks

adam-__- Grand Master

adam-__-

Posted
Posted

Sounds like one of your motors are dead. Either the motor which controls the hot/cold air or the face/feet/etc direction motor or both!

Try the diagnostic first to see what it tells you. The motors are located behind the dash and it requires you to take everything out to replace them.

our12 Enthusiast

our12

Posted
Posted

Hi.

What Deren is referring to is the sensor which is behind the 4 slits located beside the ash tray. To check the sensor is connected remove the ash tray look and you will see the sensor on the right hand side. Locate the wires coming from it and if it is not connected fish around and find the other connector- you cannot go wrong as all the connectors only fit one thing. Hopefully this should fix the problem. If you have any work done to your car recently ie clutch or new stereo equipment it is usually the cause as professinals?? who do the work like to remove the surround which goes around the centre dash equipment and neglect to connect this or the cigarette lighter wires. Hope this helps.

There is another sensor located in the engine compartment on the firewall behind the engine although is not normally a problem unless you have been playing around in that area.

sh@un Grand Master

sh@un

Posted
Posted

man, this thread has reminded me how hot R32 GT-Rs are when the weather is warm.

even with the vent set to recirc, the heat that comes through the firewall and floorpan when you drive it for a while is annoying

DAN00H Mentor

DAN00H

Posted
Posted

you could always try the simplest solution and see if all the vacuum lines are connected at the back of the climate control panel - don't laugh, I had the exact symptoms you described - checked everything they pulled the stero out again and found i'd knocked the lines off. 5 minute job and problem solved. i had added a new head unit.

emtea Contributor

emtea

Posted
Posted

My 32 GTR was the same - constantly blowing hot air, even with it set to recirculation... this thread helped me fix mine - http://www.skylinesaustralia.com/forums/R3...old-t93814.html :D

Godzilla32 Veteran

Godzilla32

Posted
Posted

R32's dont use vacuum to control vents etc. Its all electronic with motors doing the work. Sounds like its actually quite easy to see the connecter as our12 described. Check that out. Good chance its the cause. If not its a good place to start anyway. Process of elimination.

Deren

cosworth1971 Community Regular

cosworth1971

Posted
Posted
behind the stereo surround/console theres a plastic line it hink its for the climate control.

i left mine off by accident once and it kept blowing hot air in, connected it back up and air was normal :P

yes there is the intake temp hose behind the dash just to the right of the air con panel,if that falls off or if you have pulled the dash out it blows just hot air

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • funkymonkey
      Returning after a long time!

      By funkymonkey · Posted

      Por que no los dos? At least my euro brawler is reliable - unlike the JDMs I've had. Sheraaz you look familiar, did you ever come to an SAU VIC meet aaaaaages ago?
    • funkymonkey
      Phone photo thread

      By funkymonkey · Posted

      Drove to Cape Schanck to try to get a nice clear southern view over the ocean to see the lights a couple of days ago... instead got crappy cloud cover. Photo of a diorama of Hong Kong street scene. Taken on an iPhone 13 Pro Max.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      Stock RB fuel pressure is near enough 43.5 psi, so the latency in that table at 31.6 will be close. You can see that 7 or 8 psi equates to about 0.4µs extra latency. So if you wanted to interpolate between the 31.6 and 39.9 psi values you could say you're going up about 2 psi out of those 8, so add about 0.1µs, which is barely worth talking about and is quite possibly wrong because ideally you would fix the latency while running at the appropriate conditions on the dyno, with a wideband sniffing its butt.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      The pressure, is what you set the fuel pressure to. If you have the factory fuel reg, you'll need to find the factory spec. I don't know it off the top of my head, but someone else might.
    • MBS206
      Belt flex under throttle

      By MBS206 · Posted

      For others, what GTSBoy states here should be paid attention. Why? Well lots of people play with different engines, and they LOVE to change things like remove AC, or steering pumps etc, and it lends to them needing to move the tensioner too. You want your tensioner, particularly those that are sprung or hydraulically tensioned, to be the first thing after the harmonic balancer, or technically the "last" pulley in the chain. By saying last pulley, I mean look at the direction the crank spins when the engine is running, follow the belt from where the crank is pulling the belt FROM, and keep following that until you're between the last pulley/accessory on the belt and about to reach the crank again, this is the spot where you put the tensioner. This is the area that will always end up with slack. This is worked out exactly the same way for chains too, as the physics is the same for them. The crank pulley is where all the force to drag the belt around comes from. You will never ever get rid of the slack that appears, especially under load. The tensioners job is to keep the belt loose enough when stationary that there shouldn't be out of sync movement in slow movement, and then be tight enough when running, that the belt can't jump off any gear and get damaged. Too tight, bad things happen, too loose, bad things happen. Have a tensioner (mainly sprung/hydraulic one) in the wrong spot, it can't actually do anything about keeping the tension.
×
×
  • Create New...