Jump to content
SAU Community

Recommended Posts

Yes, I am an idiot .. no spare key :rofl:

Can't find my key anywhere in the house (where it must be since my car is in the garage). What is the the deal if I cannot find the key at all ? Luckily the car is unlocked at least. Will I be able to get a replacement key from Nissan or have to get a whole new ignition barrel and key from a wrecker or something ? I really do not want to have to change all the door locks as well.

Stupid, stupid, stupid for not having a spare.

Any suggestions ?? Is there a serial number on the ingnition barrel or something that might help ??

Stu

Link to comment
https://www.sau.com.au/forums/topic/198266-help-lost-key-and-no-spare/
Share on other sites

I believe you can take your vin no and other vehicle details (like chassis no) to any nissan dealer and they can cut you a new key using the factory specs.

I haven't done so myself but worth a call to a nissan dealer.

pull your door barrel out and go to a locksmith and they cut the key to the coding of the barrel we do it at work all the time for customers .

Thanks everyone,

I thought the key might have a transponder in it that would prevent a standard key from starting the car ?? Does anyone know if a standard key cut from the factory one will still start the car ?? (i.e. with no lock/unlock buttons)

Otherwise I guess I will be the guinea pig and get a key cut to the door lock barrel and see if it will work :rofl:

I believe you can take your vin no and other vehicle details (like chassis no) to any nissan dealer and they can cut you a new key using the factory specs.

I haven't done so myself but worth a call to a nissan dealer.

That wont work. Ever notice how a key wears down after use and eventually becomes just a flat edge with no bumps? Well, as the key wears so do the pins in the lock, meaning a brand new specifications key with highly accentuated edges will no work any more as the pins have also worn down to accept the worn key.

I would suggest you remove one of your door handles or the lock from the boot and go to a locksmith and get a new key cut that way.

That wont work. Ever notice how a key wears down after use and eventually becomes just a flat edge with no bumps? Well, as the key wears so do the pins in the lock, meaning a brand new specifications key with highly accentuated edges will no work any more as the pins have also worn down to accept the worn key.

I would suggest you remove one of your door handles or the lock from the boot and go to a locksmith and get a new key cut that way.

sounds like taking a barrel out is the go .. there goes remote clocking *sob*

thanks dudes.

my s1 had a factory allarm fitted but i had to get an australian approved one fitted. you may have a factory fitted allarm. i had a nissan sticker on the boot window but any alarm can be fitted to overide factory and work as the primary allarm, and central locking. hope u find your key. ps if u find it a copy cost 10 bucks

Theres a 4 digit number on every key. (it may be on the barrel as well), could also be on FAST?

Just quote the number to a reputable locksmith and he will cut it using the Nissan database.

no actual key required. (yes this means there are only 10,000 key combinations)

Some compliance shops feel it's prudent to grind the number off the key.

Our number is ground off our key, but it's in really good conditon so I'm just going to get some spares cut off the one we have.

Also, there should be a 4 digit number printed or stamped on the lock barrels. Just get that and get a key cut from the code, instead of taking out the whole lock!

Cheers, Greg.

  • 4 months later...

The one on eBay Australia? That one doesn't have the central locking remote control on it, it's just a key with a Nissan plastic cover.

http://cgi.ebay.com.au/GEN-NISSAN-KEY-BLAN...1QQcmdZViewItem

dont take out the barrel, take out one of the locks from the doors or the boot lock man.

BTW for anyone whos interested, you can get a mobile locksmith to come out and cut the key without removing any locks from the car. Takes them about 1/2 hour

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...