Jump to content
SAU Community

Recommended Posts

TCS & SLIP lights came on whilst i was just driving for about 1 second or 2...What does this mean? is something wrong?

BTW: The TCS was on, and i wasn't slipping just driving normally...and just for a whole second the TCS OFF and SLIP lights came on for nothing and went back off.

Anyone know wat it means?

Cheers thanks in advanced.

Edited by R33Turbo

lol sorry just used to posting up on this link so often.

BTW: The TCS was on, and i wasn't slipping just driving normally...and just for a whole second the TCS OFF and SLIP lights came on for nothing and went back off.

Ive just put in a GFB Blow Off Valve spring adjusted to flutter if that is related by any chance?

Edited by R33Turbo

Yep.

No doubt your car nearly stalled due to the ATMO BOV.

Put the stock one back on will fix it.

Otherwise fork out for a ECU, and a tune to get it fixed.

One is free, one will cost you.

Last thing you want is the car to stall going around a corner, you'll end up in a tree

Never stalled yet but, will a SAFC piggy back ecu help ??

Will BOV make car run rich?

BTW: Not all lights came on like when you start up the car...Just the 2 SLIP & TCS OFF

Edited by R33Turbo

Nah the CEL didn't come on all together...Only TCS OFF and SLIP light came on for like 1 second and went off whilst i was driving on TCS ON BUT i swear i didn't wheel slip at all and why would the TCS OFF come on as well if i did slip.

Nah the CEL didn't come on all together...Only TCS OFF and SLIP light came on for like 1 second and went off whilst i was driving on TCS ON BUT i swear i didn't wheel slip at all and why would the TCS OFF come on as well if i did slip.

mate it might be one of those diagnostics codes, something might be up with the ECU.... I'd do a bit of research on that and see if it turns up anything... I got an atmo bov on my GTT and i have no problems at all except a bit of a flat spot, but I don't think that has anything to do with it....

Hope that helps :rofl:

Mine only does that when I'm at DECA on the skidpan, all crossed up, MASSIVE wheel spin and the computer craps itself trying to figure out what the hell you are trying to do to it :P

Like this.

my wifes 34 did the same thing. Coilpacks are probly on the way out. Get it scanned with consult and will tell you straight away. Hers did it on start up and whilst driving, 2 coil packs where stuffed.

my wifes 34 did the same thing. Coilpacks are probly on the way out. Get it scanned with consult and will tell you straight away. Hers did it on start up and whilst driving, 2 coil packs where stuffed.

Really? So the "TCS OFF" and "SLIP" light came on ONLY at the same time for a second or so and went off and you found out the Coilpacks were causing it?

Maybe my coils are going then?

Really? So the "TCS OFF" and "SLIP" light came on ONLY at the same time for a second or so and went off and you found out the Coilpacks were causing it?

Maybe my coils are going then?

Yeah confused the shit out of us for ages. Got it scanned with consult, came up with ignition fault. I think the lights come on as a fault code. R34's have a full body control computer the whole lot.

Any mechanic or auto sparky with a snap on scanner should be able to scan it to.

Id say you have a dodgy coil. If i was you, get a set a splitfires and chuck them in.

Yeah confused the shit out of us for ages. Got it scanned with consult, came up with ignition fault. I think the lights come on as a fault code. R34's have a full body control computer the whole lot.

Any mechanic or auto sparky with a snap on scanner should be able to scan it to.

Id say you have a dodgy coil. If i was you, get a set a splitfires and chuck them in.

Bad coils wouldn't cause backfires or popping sounds from exhausts will it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...