Jump to content
SAU Community

Nurburgring Nordschleife Falls To The Mighty 911 Gt2 In 7:32


Recommended Posts

ive always said, i wanted the V-spec to be a RWD version with both manual and twin clutch auto options, with the RWD will change the weight distribution, meaning gear box mounted back so far isnt needed, hence it can run up to the engine, hence the possibility of a manual option :)

That wouldn't be a minor job, though.

Since the car was designed with a transaxle in mind, the driveshaft tunnel won't have a space for a bell housing near the driver's seat. That would mean floorpan modifications, which means structural modifications. That also means your crash tests for the regular GT-R wouldn't apply to the V-Spec, and so you'd have to comply them separately.

While Nissan is charging a mint for the GT-R, they're still not a prestige low-volume manufacturer and so they won't be able to get away with making two similar cars that require individual homologation.

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

I don't know how the GT2/3 manages to achieve such good cornering ability and yet be quicker.
oh... i don't know... maybe the fact that it has a rear mounted engine and better weight balance and distribution? :)
What's the weight difference between the GT2 and 911 turbo? (can't be bothered looking it up :down: )

The GTR is 1740kg.. 80 more than the Porche

Porsche have had over 30 years to perfect the 911

and it still isn't perfect......

X2.. and its not like they spent the last 30 years modifying the exterior :)

if Nissan wanted the GTR to be a Nurburgring warrior, they wouldnt have made it weigh over 9000 kilograms.....

Well the car was pretty focused on the course since nissan said they wouldn't actually continue with the production of the car unless it was able to complete the track in less than 8 minutes.

and as stated before, it's competitor was always the 911 turbo not the GT.

Edited by minix3

If/when Nissan releases their hardcore, stripped out versions, then it might be a competitor for the GT2. With rumours of a weight reduced "Evo" spec, if that thing gets more herbs out of the engine then they might aim it straight at the GT2.

If/when Nismo releases an R-Tune or Z-Tune then it'd probably demolish the GT2's time. Even an S-Tune would give it a good run for its money.

But, the base R35 GT-R was meant to be "luxurious" etc to be a true competitor to the 911 Turbo as an all round supercar. That it isn't as fast as the more focused GT2 isn't a bad thing. After all, no-one complains that both cars are still over half a minute slower than the production car lap record because the car that holds it is basically a bathtub with an engine and wheels.

oh... i don't know... maybe the fact that it has a rear mounted engine and better weight balance and distribution? :D

Better weight balance/distribution on any 911 Porka???? I don't think so dude, they are all rear end heavy, even the turbo awd is very light at the front.

Here are a few facts about the Porkas GT2 kerb weight 1440 kg !!! This where it has it on the new R and the other one is power, GT2 has 390kw and 580nm of torque .

Even the heavy weight 911 turbo only weighs 1585 kg with 353 kw and 620 nm of torque and when you push the button she will pump out 680 nm for a few seconds .

As for the GT3's not a lot of power here ( around 305 kw and 405 nm, more torque than any n/a production engine per lt, even more than F430) but only weigh 1375 kg !!! The new R is at least 300 kg heavier, thats a lot of beef to cart around so the new R must be very well balanced car to be able to mix it up with any of these Porkas.

In my view the R is a direct competitor to the 911 turbo and according to reports it holds its own on the Porka, I must say one thing, the turbo Porka feels like she has no turbo lag at all and she has heaps of power from about 1800 rpm up, all the way to the the red line, hopefully the R feel s the same.

pretty sure the RR layout give the advantage of better traction due to the weight of the engine at the back pushing the car down......................................................thats what tsuchiya said...........

forget Tsuchiya. gerry's son owns one so I'm pretty sure he knows what he's talking about....

my freind who put his GT3 cup car into the wall at eastern creek would tend to agree that such a rear bias can have it's problems...

That wouldn't be a minor job, though.

Since the car was designed with a transaxle in mind, the driveshaft tunnel won't have a space for a bell housing near the driver's seat. That would mean floorpan modifications, which means structural modifications. That also means your crash tests for the regular GT-R wouldn't apply to the V-Spec, and so you'd have to comply them separately.

While Nissan is charging a mint for the GT-R, they're still not a prestige low-volume manufacturer and so they won't be able to get away with making two similar cars that require individual homologation.

for almost double the $$ of the standard model, id expect them to do more than just take out the rear seats tho :banana: make em work for their money i say :down:

Oh, well, if you're doubling the price of the standard model then fair enough.

But if the standard model is going to be AUD$150K, then the V-Spec would cost $300K. That puts it line ball in price with a 911 Turbo, so it had better go faster than a Veyron. I've only ever bought Nissans and I love them, but even I would baulk at paying $300K for one.

Heard the new Lexus/Toyota whatever did the ring in 7:24...........this is getting old. Now every car manufactuer is going to be a try hard and get in on the action.

Heard the new Lexus/Toyota whatever did the ring in 7:24...........this is getting old. Now every car manufactuer is going to be a try hard and get in on the action.
Lexus’ long-awaited LF-A has unofficially smashed the lap record at Germany’s Nürburgring, with a time of seven minutes, 24 seconds

http://www.autoexpress.co.uk/news/autoexpr.../lexus_lfa.html

Edited by minix3

ooooo that's the RX7 concept isn't it???

ahahaha, this is getting ridiculous! :devil: Come on V-Spec and V-Spec II or Evo, or whatever the f*ck :D

I feel the hay-day of 90's japanese sport coupes returning. Let's hope they don't go overboard like last time and create about 20 cars each for the same market segment :worship:

furaiunveiled.jpg

Mazda Furai triple rotor beast. until now its only been seen in limp wristed concepts... this is the panty dropping variant.

furaiunveiled.jpg

Mazda Furai triple rotor beast. until now its only been seen in limp wristed concepts... this is the panty dropping variant.

I can't see it as a production car......way to out there for the general public. The front looks shit anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
    • Run some injector cleaner through it I had a similar issue that plagued me for months, even tried replacing the cat. If one or more injectors are blocked up the ecu sees ping so pulls timing and makes the tune rich overall, you'll see black smoke coming out of the exhaust and like me assume it's running rich but it could only be one or two cylinders  $10 bottle of injector cleaner and the next time I hit boost it pumped out a huge plume of black smoke, cleared the blockage and then ran great, if that's not the issue it's only a cheap thing to try haha  
×
×
  • Create New...