Jump to content
SAU Community

Recommended Posts

i know its been covered, but every scenario is slightly different:

r33 gtst

management : pfc - no hand controller

parts going on:

nismo 555cc injectors

nismo in tank fuel pump

Z32 afm

splitfire coils

HKS 2835 pro s

sorry mate, but you cant.

The car won't start.

You need a hand controller to set the 555cc injectors, and the Z32 afm.

All other mods are ok and won't have any affect when you limp your car to the shop.

Can you borrow a hand controller from somewhere? like a mate? f**k if I knew you I'd send you mine to borrow.

the car wont start with the injectors tho will it....

might have to just be a tow jobby :down:

thanx guys

case closed! bailiff please excuse the jury

Edited by joeyjoejoejuniorshabadoo

For all the money you have spent already, and the small amount you are trying to save, its just not worth it. Say it runs super rich and stuffs your plugs. Theres a minium $20 to fix that. Just get the tow, dont be tight.

[edit] if you are with RAC/Q/V/T etc use them, you will get a certain distance free. Just say it wont start :down:

Edited by dangerous_daveo

Its a plug'n'play - as a factory replacement, thats what the term plug-n-play means.

You can rip out the old ECU, stick the new one in, and it works.

Now if you change half a dozen parts then your no longer just pulling out/replacing a ECU.

No ECU simply 'works' by plugging it in. There is no way it knows what AFMs, Injectors etc are being used.

Yeah, i was really after the easiest option, not the cheapest. After blowing 20k on the car in the last 6 months i'm not really looking to save 50 bucks :down:

either that, or get a mate with a 4x4 or something decent to tow you there via rope. THat is legal isn't it?

How far away is the tuning shop?

In vic that isnt legal, must be on a tow truck or trailer.

ill informed once again..ha thanks ash

i thought i could save money on installation costs for a pfc tune. i was quoted $500-$600 for an install and tune. i had been told tuning is $150 per hr and it would take on average 2 hrs to tune so if i could save $200-$300 just for installation all the better.

sorry for the hi-jack if any.

flat tow is the cheapest option, just be carefull with the tow rope and your front bar...or you could just take the front bar off? is that still legal?

flat tow is the cheapest option, just be carefull with the tow rope and your front bar...or you could just take the front bar off? is that still legal?

I actually rang up vic roads about 12 months ago and was told the flat towing was illegal, after R31Nismoid post i checked the vic roads web site and it says it is legal....

I've done it many times years ago when i have a ZJ Fairlane, i was the "tow car of choice" for the boys cause it was a V8 etc.

Altough, it cant be done @ night, or with a car that doesnt have working hazards/brakes and so on from what i was told by the law.

But then they can also be wrong too

i thought i could save money on installation costs for a pfc tune. i was quoted $500-$600 for an install and tune. i had been told tuning is $150 per hr and it would take on average 2 hrs to tune so if i could save $200-$300 just for installation all the better.

sorry for the hi-jack if any.

flat tow is the cheapest option, just be carefull with the tow rope and your front bar...or you could just take the front bar off? is that still legal?

Installation of a PFC takes 30 seconds... or were you talking about other parts also?

You should be right taking the front bar off to flat tow as its the rear of the car (hazards, brake lights and so on) that need to be working.

Having said that, it might be illegal, but even a nasty officer wouldnt get too picky on that i reckon. Its pretty line-ball.

http://www.vicroads.vic.gov.au/Home/Regist...eredVehicle.htm

According to that link the only conditions for flat towing is the brakes must work, the cars have to be no more than 4metres apart and have a flag on the rope between the cars, with the price of trailer hire or a tow truck i know i wouldnt bother flat towing anything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
    • Hi, I need same this wing nismo , Does anyone have one for sale?  if any one have can contact me  00966546888343
    • Nah, lots of insurance repairs on V36 and V37 for pedestrians deployments. Reasons ranging from possums, to extremely severe potholes have deployed them. However, paying for the full repair can still be upto $5k AU some people have noted!
    • Hi, i got 1998 r34 4 door auto abs model and its manual converted with bigbox when i bought it . I successfully find the neutral and reverse light wire but can’t find the speed signal wires for speedo drive. I know its grey plug but on my loom no grey plug with 2 wires . I opened the loom upto where it getting branch with other wire, i’m amazed they is no wire. So need help how to fix the speedometer problem. I search on google it says some r34 model measure speed from diff sensor. Is it right? I talk to a wrecker he say no this isn’t right, i’m kinda stuck. Please help
×
×
  • Create New...