Jump to content
SAU Community

Recommended Posts

hey guys

just wondering, is there a table or conversion method to work out what size injectors can support what power (hp)?

i did a quick search and it has been suggested that 1cc supports roughly 1hp, so 700cc inj supports around 700hp

some1 also came up with; cc x 6/5 = hp (700cc x 6/5 = 840hp), which seems quite high

please confirm :)

cheers,

Andy

Edited by andz
Link to comment
https://www.sau.com.au/forums/topic/200355-injectors/
Share on other sites

stock gtst injectors and a FPR will do 250rwkw

well i've already bought the injectors and fuel pump, and i want some breathing room in the event that the high flow makes much less than 250rwkw and i get bored and decide to strap on a bigger turbo :( . but i wouldn't be aiming any higher than 280rwkw, cause i can't afford a rebuild :) . so the 440cc injectors should still be up the task

Link to comment
https://www.sau.com.au/forums/topic/200355-injectors/#findComment-3565475
Share on other sites

so why is it that i've read articles in hpi etc that have cars with a power output of about 500rwkw but they're using 1600cc injectors?? do injectors still work accurately even when they're being used below the level they're designed for?

Link to comment
https://www.sau.com.au/forums/topic/200355-injectors/#findComment-3570780
Share on other sites

Personally I would not want to be using any injector (or fuel system for that matter) at more than MAX 85% of its capacity. In case shit happens, it is probably a good insurance. (having said that how anal and redundany you want / need to be with your fuel system depends on what what your doing with the vehicle and how far you want to take things), $$$ add up quickly :D

Link to comment
https://www.sau.com.au/forums/topic/200355-injectors/#findComment-3570862
Share on other sites

yea mate but how many 1600cc squirters are they using??

many racing/high performance cars use big injectors to suppliment their apetite. they are called 2ndary injectors. and it is very common in rotors. e.g. they may be using a few 500cc injectors then use a couple of 2000cc injectors to beef up the support.

i personally dont know y they do it. perhaps using all 2000cc squirters may be too expensive or inefficient....

im sure someone on here might know?

Link to comment
https://www.sau.com.au/forums/topic/200355-injectors/#findComment-3571162
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...