Jump to content
SAU Community

Recommended Posts

I sorta look big and I'm not on anything Phillis...so there goes that theory.

A lot of that mind set comes from those that may not be as big as the guy they're comparing themselves too, so he must be gearing...

sorry let me rephrase that.. about 95% of the people i know and a rake and 3 - 5 months later their quite massive.. So yes around 99.99% of the time they are gearing.. You can tell whos gearing and who isnt.. Someone with a rake-like figure 3 months later is packing meat with massive bi's and tri's..yes thats gear.

iv been asked a few times if im on gear.. Im normally a chubby guy lol

Hmmm thats debatable...Take too long and your simply going to lose the pump. I mean certain bodyparts may need a bit more trime, eg Squats, Benchpress etc otherwise you just aint going to have the lift power. but other bodyparts like Biceps and Triceps i think you really dont want getting cold

45 mins work out is just a waste of a trip to the gym. You're not getting big, toned yeh sure.. not big! Short work outs are ideal for getting ripped.

To be honest I hardly work on my biceps and it's fair large. I'm speaking about 18-19inch here. I just pick up a barebell or dumb bell every now and then doing 10 reps of 2 or 3 just before i head out. There is no particular day i dedicate it on arms, they naturally grow as you focus on chest, shoulders and back in secondary form

Edited by Barbarian
45 mins work out is just a waste of a trip to the gym. You're not getting big, toned yeh sure.. not big! Short work outs are ideal for getting ripped.

To be honest I hardly work on my biceps and it's fair large. I'm speaking about 18-19inch here. I just pick up a barebell or dumb bell every now and then doing 10 reps of 2 or 3 just before i head out. There is no particular day i dedicate it on arms, they naturally grow as you focus on chest, shoulders and back in secondary form

45mins for 2 bodyparts is a bit short I would say..That I agree with, 2 bodyparts, Depending on what time of the day.Quiet time 1 hr - 1 hr 15 is good- Busy time of the day best if you knock it over in 1.5 hrs or under. Not always do-able .But I generally keep training until I have completed my routine. Sometimes that can be anything from 1.5 - 1 hr 45.

18-19 inch arms impressive, I am going to take a guess that your not a real tall person correct ?

45mins for 2 bodyparts is a bit short I would say..That I agree with, 2 bodyparts, Depending on what time of the day.Quiet time 1 hr - 1 hr 15 is good- Busy time of the day best if you knock it over in 1.5 hrs or under. Not always do-able .But I generally keep training until I have completed my routine. Sometimes that can be anything from 1.5 - 1 hr 45.

18-19 inch arms impressive, I am going to take a guess that your not a real tall person correct ?

6'00" to be exact

is that tensed or relaxed?

tensed ofcourse

6'00" to be exact

tensed ofcourse

Wow very impressive..! Natural ? As with those size arms I would be thinking a shot at the ANB would most likely bring home a trophy or two provided the rest of the physique is matching

45 mins work out is just a waste of a trip to the gym. You're not getting big, toned yeh sure.. not big! Short work outs are ideal for getting ripped.

To be honest I hardly work on my biceps and it's fair large. I'm speaking about 18-19inch here. I just pick up a barebell or dumb bell every now and then doing 10 reps of 2 or 3 just before i head out. There is no particular day i dedicate it on arms, they naturally grow as you focus on chest, shoulders and back in secondary form

Pics or your talking shit :P:). Kidding but 19 inches, thats huge brother. Whats your bf% at?

Edit: Oh yeah and isn't being toned based on bf%? 45 mins is fine for building mass man.

Edited by lsk

Will provide pics of body + arm with tape measure + what i weigh.. tonight

not sure what my bf is at the moment, actually i was supposed to be assessed during the week but had to post pone it for the coming week. I'm guesstimating anything between 13-15%, not really fussed at the moment because ideal cutting time frame is between mid spring to start of summer

Edited by Barbarian

i dont care if someones on the gear or not... just dont judge me because im small and your big.. my small is real though. plus... id rather be small and ripped than huge.. bruce lee was small.. he'd kick all yo' asses.. and all chicks love brad pitt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...